BOV?
#31
Re: BOV?
Originally Posted by ghettoturbo
Originally Posted by tegboi
i just got my dsm 2gen crushed on, and it just sounds like my turbo downspooling. it sounds off when i let off, but when im expecting the pshh, all i hear is the turbo spooling down.
when i was installing the bov, there was alot of oil that came out of the port where the manifold vacuum is suppost to go.
when i was installing the bov, there was alot of oil that came out of the port where the manifold vacuum is suppost to go.
#32
Re: BOV?
Originally Posted by BLAAST
on low budget setups. I use this one:
OF course it's a thaiwanese knock off, and the spring is always too tight so it needs to be cut but with that done, it performs very well, is MUCH easier than a DSM bov to install, it is adjusteable and at least, it is brand new and still very cheap.
OF course it's a thaiwanese knock off, and the spring is always too tight so it needs to be cut but with that done, it performs very well, is MUCH easier than a DSM bov to install, it is adjusteable and at least, it is brand new and still very cheap.
#33
Guest
Posts: n/a
Re: BOV?
Originally Posted by zer0daze
Originally Posted by BLAAST
on low budget setups. I use this one:
OF course it's a thaiwanese knock off, and the spring is always too tight so it needs to be cut but with that done, it performs very well, is MUCH easier than a DSM bov to install, it is adjusteable and at least, it is brand new and still very cheap.
OF course it's a thaiwanese knock off, and the spring is always too tight so it needs to be cut but with that done, it performs very well, is MUCH easier than a DSM bov to install, it is adjusteable and at least, it is brand new and still very cheap.
#34
Re: BOV?
the best BOV out there period is the 2nd gen Mr2 BOV, it responds the fastest. dual diaphram, responds to changes in manifold pressure, not vacumn itself, i can actually make the bov go off while boosting by playing with the throttle. its fuckign sweet. its pretty loud, you could make it louder by blocking off some of the passage to get a louder sound. The HKS SSQ is a copy of this BOV.
O and did I mention this baby doesn't open at idle?
best bov ever in my opinion.
O and did I mention this baby doesn't open at idle?
best bov ever in my opinion.
#37
Re: BOV?
quite possible. Cutting the spring is an adjustment. You can cut too much, or too little.
If it'S still too stiff, he has to cut more. after that, The whole cap of the BOV can be screwed in or out for fine tuning anyways. If you cut too much, then you can always add a few washers to make it stiff again.
If it'S still too stiff, he has to cut more. after that, The whole cap of the BOV can be screwed in or out for fine tuning anyways. If you cut too much, then you can always add a few washers to make it stiff again.
Thread
Thread Starter
Forum
Replies
Last Post
Stephen
Turbo Parts For Sale
14
03-03-2006 05:08 PM
biggmike
Turbo Parts For Sale
10
04-26-2005 09:15 AM
2000psi
Turbo Parts For Sale
26
07-11-2003 04:59 PM