HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Bout to start my car up. Fucking scarred. (https://www.homemadeturbo.com/forced-induction-7/bout-start-my-car-up-fucking-scarred-76704/)

HMTguy 04-18-2007 07:44 PM

Re: Bout to start my car up. Fucking scarred.
 
Samson, I was referring to the fact that you think you have "oil pressure squirting" when you turn your key to the on position. The oil pump is mechanical, fuel pump electric.

trent 04-18-2007 08:15 PM

Re: Bout to start my car up. Fucking scarred.
 
even easyer un plug the distributer and turn it over for a few sec . then start it up and drive it like you stole it

WTF 04-18-2007 08:33 PM

Re: Bout to start my car up. Fucking scarred.
 
i never primed my turbo but they were always used ---- anyways i do like to take my oil drain off and make sure oil comes out

AJxr 04-18-2007 08:41 PM

Re: Bout to start my car up. Fucking scarred.
 
so how did it go there fluffykins?

USS 04-18-2007 09:00 PM

Re: Bout to start my car up. Fucking scarred.
 
gen4acclude and sinister are both ------- morons.

If you hold the compressor wheel it will not spin... unless of course you rev the ---- out of your motor. That is all you need to do.

imburne 04-18-2007 09:52 PM

Re: Bout to start my car up. Fucking scarred.
 

Originally Posted by Snafubmx234
gen4acclude and sinister are both ------- morons.

If you hold the compressor wheel it will not spin... unless of course you rev the ---- out of your motor. That is all you need to do.

Thank you!

samson 04-18-2007 10:22 PM

Re: Bout to start my car up. Fucking scarred.
 

Originally Posted by jagojon3
Samson, I was referring to the fact that you think you have "oil pressure squirting" when you turn your key to the on position. The oil pump is mechanical, fuel pump electric.



Right, sorry. We had like plug wires pulled or something and turned it over.




Originally Posted by gen4acclude
you dad huh sounds like you are the ----- lol


Gee thanks. Sorry I have a loving father that has little common sense, but yea I'd probably not put my hand near 1600* manifold and power-steering belt and burn my hand on the compressor due to heat increase in boost. I'm such a girly girl. ::)


JP

gen4acclude 04-18-2007 11:02 PM

Re: Bout to start my car up. Fucking scarred.
 

Originally Posted by samson
Gee thanks. Sorry I have a loving father that has little common sense, but yea I'd probably not put my hand near 1600* manifold and power-steering belt and burn my hand on the compressor due to heat increase in boost. I'm such a girly girl. ::)


JP

:-* easy big guy not harm was done lol

noboostedEGo 04-18-2007 11:40 PM

Re: Bout to start my car up. Fucking scarred.
 
my god just unplug the damn ecu fuse, and if you wanna be really safe, pop off the return line, and crank it til oil comes out, you can check for leaks in the feed line too at this point. just don't crank for more than around 10 secs at a time.

holding the blades obviously will work too...but pulling a fuse is pretty damn easy.

HondaTuner 04-18-2007 11:53 PM

Re: Bout to start my car up. Fucking scarred.
 

Originally Posted by Snafubmx234
gen4acclude and sinister are both ------- morons.

If you hold the compressor wheel it will not spin... unless of course you rev the ---- out of your motor. That is all you need to do.

Ever hear of human error? That's a new concept eh? What if the jackass starting the car hits the gas? I don't trust people, thats why I wouldn't do it that way. :1


All times are GMT -5. The time now is 08:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands