HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   boosting a d15 (https://www.homemadeturbo.com/forced-induction-7/boosting-d15-70044/)

mike94se 11-15-2006 11:05 PM
Re: boosting a d15
 
Originally Posted by AJxr
arent you the guy who boosted a crx with no management what so ever? stock injectors are 240cc 270cc isnt going to help much. get the 450s, no point in boosting something if its going to last 2 weeks if that. chipping your ecu wont help if your injectors max out.
Plugged in 450's sans resistor and chip, then sold them and said he wanted an FMU.


Also PM'd me cause he's niggardly ::)

laports_best_crx 11-15-2006 11:14 PM
Re: boosting a d15
 
ya no management right now but im not drivin it so it doesnt matter. im mailing my ecu to get it chipped, soon!!

TurboMightyMax 11-15-2006 11:50 PM
Re: boosting a d15
 
Originally Posted by AJxr
arent you the guy who boosted a crx with no management what so ever? stock injectors are 240cc 270cc isnt going to help much. get the 450s, no point in boosting something if its going to last 2 weeks if that. chipping your ecu wont help if your injectors max out.
Last I checked they were 190cc injectors. I have 240cc injectors in my Y8....

idiot-stick 11-16-2006 08:33 AM
Re: boosting a d15
 
Don't listen to the guy about 270cc injectors. He doesnt know what he's talking about. 450's will be fine and give you plenty of headroom for improvement. 14b on a D15 is a good, cheap setup. Im running a D16Z6 with a 14b which is basically the same thing. Been running for ~5 months and it's pretty quick.

mark. 11-16-2006 02:16 PM
Re: boosting a d15
 
Originally Posted by SloS13
Don't listen to the guy about 270cc injectors. He doesnt know what he's talking about. 450's will be fine and give you plenty of headroom for improvement. 14b on a D15 is a good, cheap setup. Im running a D16Z6 with a 14b which is basically the same thing. Been running for ~5 months and it's pretty quick.
what psi is it set to?



im going to the junk yard this weekend to pick up a hf manifold and im buying a 14b soon. is a t25 a better turbo. i heard the 14b is an upgrade to the t25?

turbocivic6776 11-16-2006 09:47 PM
Re: boosting a d15
 
I believe that the 14b is bigger the t-25 is tiny

ifly87 11-16-2006 11:29 PM
Re: boosting a d15
 
14b is bigger than the t-25, not by awhole lot but it will work great on your d15.

idiot-stick 11-17-2006 07:49 AM
Re: boosting a d15
 
Originally Posted by mark.
what psi is it set to?
I'm only running 9psi. Not trying to set any new records, I just wanted a little pep. I've run both t25's and 14b on D series and would definitly go with a 14b. t25 is a bit too small, 14b is just right for moderate power.

mark. 11-17-2006 02:41 PM
Re: boosting a d15
 
Originally Posted by SloS13
I'm only running 9psi. Not trying to set any new records, I just wanted a little pep. I've run both t25's and 14b on D series and would definitly go with a 14b. t25 is a bit too small, 14b is just right for moderate power.
cool. thats what i wanted to know

mark. 11-18-2006 12:16 PM
Re: boosting a d15
 
k got another question. is the stock fuel pump sufficient for the 450's?


All times are GMT -5. The time now is 03:12 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands