Boosted dohc Zc crx 90% complete
 

got the crx towed to work so i could drop in the new motor/tranny .i've been working every day on it since i got it back from the bodyshop. only have 13 days left til i tow it up to evans.hot side charge piping is can't be completed til i get my new ramhorn and dp. still need a obd1 dizzy,oil cooler,oil psi gauge,and a bunch of misc ----.anyways heres the pics

Attachment 32861
Attachment 32862
Attachment 32863
Attachment 32864
Attachment 32865
Attachment 32866

Re: Boosted dohc Zc crx 90% complete
 

---- is pretty hot at the same stage with mine 2 just getting lazy because its so ------- hot in VA.

Re: Boosted dohc Zc crx 90% complete
 

Thats nice. ;D

What kind of traction bars are those? Does the main bar mount to where the tow hooks used to be? Are they the double heim jointed kind, or do they mount up like the OE strut rods do? Thats a slick setup, me likes alot.

Re: Boosted dohc Zc crx 90% complete
 

thanx, yes the bars mount up to the stock location and they have a 2 point solid mount for the lca and a heim joint up front. they are etd bars but they told me they are powdercoated and they are not, we'll see if they hold up. they don't offer alot of extra room but better than stock x-member

Re: Boosted dohc Zc crx 90% complete
 

Super clean setup , good shizzle 8)

Re: Boosted dohc Zc crx 90% complete
 

whos got a obd1 dohc zc dizzy or a prelude vtec obd1 dizzy?

Re: Boosted dohc Zc crx 90% complete
 

i hope some vid about this car runing.. look awesome! :P

Re: Boosted dohc Zc crx 90% complete
 

yea i have to learn to record video clips so i can upload the dyno session

Re: Boosted dohc Zc crx 90% complete
 

read instruction of your camera :P and do it soon!

Re: Boosted dohc Zc crx 90% complete
 

That's where I put my tools when I work on mine. SNAP ON............Hmmmmm

Re: Boosted dohc Zc crx 90% complete
 

actually not the best place for them, i only put my ratchet there. a friend of mine was working on his prelude and took out the plugs, changed the fuel filter etc and in the process dropped a copper banjo washer in to the spark plug hole into the cylinder(keyword copper) :1

Re: Boosted dohc Zc crx 90% complete
 

dang man, goin old skool with the ZC. I like it. :D

Re: Boosted dohc Zc crx 90% complete
 

bahhh B series are overrated

Re: Boosted dohc Zc crx 90% complete
 

Not to bash, but have fun when those radius rods break!!!

Re: Boosted dohc Zc crx 90% complete
 

Loving the zc. Car looks nice, the wastegate dump tube should be routed back into the exhaust. Its so much quiter and you can hear the turbo so much more, trust me.

Re: Boosted dohc Zc crx 90% complete
 

i just wanted a temp bar til i get my hands on a set of full-race bars. so when they break i guess thats when its time to get new ones lol. i was looking for a bar that didn't attach to the tow hooks because the shitty L-con bars broke my tow hook mounting bolts inside my frame so i wanted a bar i could just slap right on til i get time to re-weld the nuts inside the frame(when i get the full-race)

Re: Boosted dohc Zc crx 90% complete
 

Looks great man :y This was the engine you were building in your living room?What kind of numbers you looking to make?Take lots of vids >:D

Re: Boosted dohc Zc crx 90% complete
 

275-300whp im going to max out my turbo(.48 turbine) should stop making power around there maybe even 320. im still debating whether to just start with low boost then turn it up later to see what it'll turn out.

Re: Boosted dohc Zc crx 90% complete
 

looks good. you def. gonna have all those parts by the time you head up to evans? That would suck if you were still waiting on ----. Well whatever happens, good luck with it. 300whp would be delicious

Re: Boosted dohc Zc crx 90% complete
 

Are your Hp #'s restricted to your turbo? If so, how much do you think your zc can handle? Is the motor built?

Re: Boosted dohc Zc crx 90% complete
 

i always pull through at the last minute, im working out minor flaws everyday(re-routing) and other B.S. im buying ---- as we speak, next dayin everthing i can't sleep til i hear it run :X

yea power is pretty much restricted to the turbo. its fully built and balanced, ported head/rebuilt head, .20 over wiseco pistons,crower rods,block guard, posted block

Re: Boosted dohc Zc crx 90% complete
 

I'm only bothering you because I have a ZC also.

Why did you put a block guard in if it's posted? Are you just being ultra conservative?

and do you have to "notch" the bottom of the cylinders with the crower rods?

Thanks for the info so far, Keep reppin' for the ZC's out there.

Re: Boosted dohc Zc crx 90% complete
 

yes i notched the block. and i just added the block guard because its worth the extra added insurance. the posts go mid way up the sleeve and the guard goes on the top. besides not too many people have experimented with using both. just want to prove it can benefit if done properly.

Re: Boosted dohc Zc crx 90% complete
 

Pretty much alway have to notch a D. I did for my eagles.

What type of block guard? Didn't you o-ring the block? I was going to post my Devcon Block also, but never did. What HG are you running? HKS? OEM Comp? Did you see the www.thezcr.com post about Cooper and modded MLS HGs?

Re: Boosted dohc Zc crx 90% complete
 

race engineering block gaurd(upper sleeve), posted (mid/lower), o-ringed, hks mls gasket(.7mm), wiseco .20 over 9:1 pistons. never saw a thread about modded mls hg's i would never think of altering a hg in anyway,im too paranoid

Re: Boosted dohc Zc crx 90% complete
 

where did you pick up the HKS and how much $?

Re: Boosted dohc Zc crx 90% complete
 

horsepower freaks $130. Ramhorn mani is almost done(fabbed by none other than the gr8 hotsex) pics up soon

Re: Boosted dohc Zc crx 90% complete
 

https://img.photobucket.com/albums/v...0/000_1329.jpg

well the ramhorns complete and im just waiting on a oil psi gauge,oil cooler and dizzy all on express shipping. 6 days til dyno session

Re: Boosted dohc Zc crx 90% complete
 

i give them about as much time as the set you shipped noel. personally i think his set looks much better than the stuff noel didnt want to put on his car cause it looks unsafe, did i mention 91's came with ALL the hardware...?

not to bash or anything

Re: Boosted dohc Zc crx 90% complete
 

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

:y

Re: Boosted dohc Zc crx 90% complete
 

looks hotttt!!!! did you run your hot side pipe up through the washer bottle location?

Re: Boosted dohc Zc crx 90% complete
 

yea i scrapped the washer bottle

Re: Boosted dohc Zc crx 90% complete
 

I bet ur cold side charge pipe makes the radiator mounting a huge pain in the ass. Why not run it threw the inner fender?

Re: Boosted dohc Zc crx 90% complete
 

dont you worry about that. horhey is bringin the car back to my house for some last minute"adjustments"

Re: Boosted dohc Zc crx 90% complete
 

Re: Boosted dohc Zc crx 90% complete
 

i'll have to roll up some time to Josh's when your there, so i can check out the ride.

Re: Boosted dohc Zc crx 90% complete
 

tuesday noel

Re: Boosted dohc Zc crx 90% complete
 

see ya there. tomorrow for sure

Re: Boosted dohc Zc crx 90% complete
 

earlier the better.

Re: Boosted dohc Zc crx 90% complete
 

Looks like a really nice setup, good luck on everything going smoothly.