This is true, but I'm trying to find out if i will have to modify the downpipe / charge piping. I found out the manifold should fit

what year is your integra. Because if it is a 95 and up you shouldn't have any problems with down pipe and charge pipes.

its a '97

anyone here every try a ebay obd2a-obd1 conversion harness?

Does anybody know WHICH gm map sensor i can use for my project?

How much boost are you goin to run? The amount of boost depends on what map to run.

I bought one from a ebay company that is also a web order company that has a out side website. They stand behind it. I ordered mine. Hooked it up and it was bad. They send me a new one the same day with no questions asked.

for now, probably somewhere around 15psi. I was just going to buy a 3bar map sensor right from the get go because i don't want to be bothered by having to buy another if i decide on running more boost than the sensor is able to handle.

can i take any 2, or 3 bar map sensor and wire it up to work? I'm really hoping to be able to score one out of the junkyard if possible. I know people run the motorola, omni, aem etc etc, but can it be out of like a toyota or something that has a 2 or 3 bar map sensor????? thanks guys.

2.5 bar map sensor will give you a max boost reference of 22 psi. 3 bar map sensor will give you a max boost pressure of 30 psi. check ebay. the gm map sensors are all over the place for 50-60 new. why risk pulling a shitty used one from the junk yard. there certain things you do not want to go used. your engines life depends on that sensor.

Ok, I will buy a new one. But my question still stands.

Can it be from like a Toyota Mr2 or something, does it HAVE to be a gm sensor?? I know some of the gm trucks have map sensors, could i go to the parts store and order a map from like a 3.8 v6, or does it specifically have to be from a 89 trans am?!

I don't know about the mr2, but I say get the gm sensor that is at lease an obd1. I say get off of a 95 camaro with the 3.8