i recently put a fart can on my car. So after the install i was driving around since starting my new tune i have never done a long pull so basicly on my low cam the guage stops at about 15psi crome says 15.3 then at 5k the vtec engages from 5800-6000 i creep to about 18psi i have boost cut set for 17 so it pulls back i tryed to remove boost cut and i sit about 18.2 so how do i stop this creep.ps im using chingchong 38mm wastegate do i need a bigger or duals?

 

found the reason damn freeflowing exhaust

 

yea i had a rigged 2.5 apexi ws i finaly bought a 3" can now i creep like a basterd the wastegate is set for 14.7 i creep 22 then the motorla is maxed

 

Boost creep is good

 

Boost creep is free traction control. Turn that ---- down to 10-11psi or something else manageable in 1st and 2nd and let it creep in the longer gears. Yar!

 

What manifold are you using?

 

tt mni ram

i have a 1 bar spring