Forced Induction Custom FI Setup Questions

Boost controllers, TURBO EXPERTS REQUIRED!!!

Thread Tools
 
Search this Thread
 
Old Dec 26, 2006 | 01:26 AM
  #1  
PaRaDoX's Avatar
Thread Starter
0.5 BAR
 
Joined: Apr 2006
Posts: 178
Default Boost controllers, TURBO EXPERTS REQUIRED!!!

hey, i understand the basics of a boost controller, i am about to purchase a manual boost controller

i have a external HKS style wastegate, its got a 10psi spring in it... with a controller i know i can raise the boost but can i drop it below 10psi or would i need 6psi spring to do that??

i wanna run it at 6psi daily, then raise it to 10-12 when i wanna go a run...
just to make it last longer before it goes bang
Old Dec 26, 2006 | 01:31 AM
  #2  
88dx's Avatar
3.0 BAR
 
Joined: Nov 2003
Posts: 5,838
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

Cant lower the boost with a MBC. just run 10psi all the time and hope your WG creeps
Old Dec 26, 2006 | 04:12 AM
  #3  
Donald125's Avatar
3.0 BAR
 
Joined: May 2003
Posts: 6,276
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

yea you can only turn UP the boost with a MBC, WG spring will limit the mininum you will be running.
Old Dec 26, 2006 | 05:33 AM
  #4  
PaRaDoX's Avatar
Thread Starter
0.5 BAR
 
Joined: Apr 2006
Posts: 178
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

cheers guys, that exactly what i thought, just wanted to confirm..

i brought a manual boost controller (MBC)

umm ill probbly change the wastegate spring to 6psi so i can run 6psi daily
how far can you boost it with the MBC

hope your wastegate creeps?? whats that mean??
Old Dec 26, 2006 | 09:08 AM
  #5  
BLAAST's Avatar
1.5 BAR
 
Joined: Oct 2004
Posts: 877
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

boost creep is when the boost overshoots your desired setting. That happens when a wastegate is too small or too restrictively plumbed. I doubt it's your case with your 40mm wg.

if you want to lower boost a tad, just cut 1-2 loops from the spring and you can raise it back to 10 psi again with your MBC.

Make sure to mount your MBC using the shortest possible hoses.
Old Dec 27, 2006 | 02:14 AM
  #6  
PaRaDoX's Avatar
Thread Starter
0.5 BAR
 
Joined: Apr 2006
Posts: 178
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

man what i good idea cutting springs :P
heheh cheers, ive got a 45mm "HKS" rip off wastegate soo yeah should be big enough

just one more question, where do you run the vaccume lines for the MBC, i read somewhere that you run 1 off the wastegate and one off the pipe after boost??

im trying to understand how they work, i think i got it sussed, they push boost into the valve area, making it harder for the valve to open?? or something similar,

Old Dec 27, 2006 | 05:29 AM
  #7  
BLAAST's Avatar
1.5 BAR
 
Joined: Oct 2004
Posts: 877
Default Re: Boost controllers, TURBO EXPERTS REQUIRED!!!

you feed boost to the side port of the wastegate and you add SOME boost to the top port using the MBC. exactly AS you said, the boost you add to the top port prevents the opening of the wastegate, making the boost increase.

Man if your car is correctly tuned for 10 psi safely, I don'T see why in hell you would want to reduce it at 6 psi daily!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
glht_omni
Turbo Parts For Sale
0
Oct 23, 2010 01:45 PM
StanB
Forced Induction
11
Dec 17, 2005 06:41 PM
chinoy
Forced Induction
9
Jun 16, 2005 12:43 AM
Reddy
Forced Induction
20
Aug 22, 2004 07:03 AM




All times are GMT -5. The time now is 04:11 AM.