HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   boost all over the place (https://www.homemadeturbo.com/forced-induction-7/boost-all-over-place-21466/)

turbo z24 guy 06-03-2004 03:15 PM

boost all over the place
 
i dont get this... turned up the boost a little more now that my wideband came and all. well off the line she hit 10psi while the wheels were spinning. as soon as they started to grip it drops down to like 7, the goes up to bout 8 and stays there most of the time with a slight drop off and the raise again. what the hell could be causeing this? a shitty manual bosot controller? boost leaks? i pressureized the system the other day and she held 19psi just fine (droped off pretty slow) so i dont really think its a bosot leak. is it normal for the bosot to dropm off once the tires stop spinning??? any ideas on whats up?

sohcrxsi 06-03-2004 03:26 PM

Re:boost all over the place
 
sounds like a shitty mbc. what kind is it?

RENR 06-03-2004 03:42 PM

Re:boost all over the place
 

Originally Posted by sohcrxsi
sounds like a shitty mbc.


hybrdcivic95 06-03-2004 03:48 PM

Re:boost all over the place
 
i would think it would drop off after the tires stop spinning, b/c while spinning theyre probably turning faster than when it catches traction all the sudden, so youre not putting as much a load on it as you are when spinning

Speedracer32 06-03-2004 06:45 PM

Re:boost all over the place
 
^^^^^^
was thinking the same thing ;)


neil85ae86 06-03-2004 09:22 PM

Re:boost all over the place
 
you guys have got that backwards, more load when not spinning than when spinning, cars that don't spin (launching at the track) brake axles and other driveline parts and cars that spin don't.

...but because the rpm is lower as soon as traction starts, their would have been less exhaust gasses driving the turbine so possibly that is why.

Neil

quadnie 06-03-2004 09:38 PM

Re:boost all over the place
 
Good points made for the load/no load torque specifications. Regardless of what is happening, there is a part failure. Any way to try a diff bleed screw boost controller? Suprised you don't have a nice expensive ebc looking at your ride.

turbo z24 guy 06-03-2004 10:04 PM

Re:boost all over the place
 
heres the bad boy im using, lmao
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

so you think the crazy boost changes is due to the tires spinning or the mbc?

quadnie 06-03-2004 10:25 PM

Re:boost all over the place
 
What a POS. Why not just shell out for a real one.. hope that company doesn't screw & run with you. It "looks" like it should work tho.

Typically you will see more boost while not under a load, since the rpms can easily climb. Just turn the boost up some and see if you get a little bit more while driving.

turbo z24 guy 06-03-2004 11:37 PM

Re:boost all over the place
 
lmao. i figured a mbc is a mbc, all work the same way. guess maybe not though. but so then you're saying it is normal to have higher boost when there's no traction?


All times are GMT -5. The time now is 01:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands