Blowing through Maf/Vaf?
 

I hate the way the VAF looks right at the end of my intake. Just wondering if it would work if I blew through it rather than pulling through it.

Re: Blowing through Maf/Vaf?
 

Just let it be and quit ------- around with unecesary bullshit O0

Re: Blowing through Maf/Vaf?
 

What kinda of car?

Re: Blowing through Maf/Vaf?
 

90 probe GT... :'( :'( :'( :'(

Re: Blowing through Maf/Vaf?
 

I would just leave it alone. If its not broke why fix it.

Re: Blowing through Maf/Vaf?
 

cuz its ugly as ----, but then again, so is the car.

Re: Blowing through Maf/Vaf?
 

Thats a good reason ::)

Do some fucken research! There were no conclusive answers for me to blow through my mafs on my z, so eventually after all the bullshit reading and discussion I gave it a shot and it seems to be fine. Mind you, its afer my ic. Its not near hot manifolds, and its only on ten psi.
You have read up on your mafs and decide whether hotter air is going to ---- with your afr's, as they were designed to suck in outside engine bay air. Not hot turbo charged air.

Also, will your mafs leak? I know some guys have to seal their mafs as they blow plastic caps off and leak.

I must work now. Read more!!

Re: Blowing through Maf/Vaf?
 

Does the VAF have a hinged flapper? If so, then I dount you can blow through it. I have read that one can adjust a screw to rough tune it, but I may be wrong.

Re: Blowing through Maf/Vaf?
 

Just leave it as is.You dont have to worry about it leaking if you move it to the pressurized pipes.

Re: Blowing through Maf/Vaf?
 

Don't do the screw mod to the VAF. Proven that it fucks with your AFRs. IE you won't run rich enough at full boost at higher RPMs.

I have seen other people do it as a blow through, however. I'd reccomend having a second VAF just incase something screws up. They all say they carry a second VAF with them.

But if your going to go through the hassle, why not squirt it an convert it away from the VAF? Plenty of research done for it now. Hell you can buy the completed kit (last I checked) Off Probetalk.

Trust me, I have an 89 (bulit in 1/88 an everythings differnt >,<) I've done quite abit of looking into it.