Re: Bitch ass oil leak
Originally Posted by myshtern
I think what I'll try is wrap take the line off and wrap a -----ton of high temp RTV on the pan fitting and slide the line over it. Hopefully it will make a seal in that junction. If that doesnt work, I'll try what civicsi said with a more flexible line.
|
Re: Bitch ass oil leak
I was thinking I'll just be careful so that all of it stays on the outside of the fitting. Too risky? ???
|
Re: Bitch ass oil leak
i cant believe that a hose clamp will not seal it up....i use rad hose with a hose clamp, works every time
|
Re: Bitch ass oil leak
Look on the first picture, you see oil on the outside of the line at probably what is the lowest point.
http://xs77.xs.to/pics/06166/b03.jpg http://xs77.xs.to/pics/06166/b04.jpg http://xs77.xs.to/pics/06166/b05.jpg |
Re: Bitch ass oil leak
Stealth already told you that the fitting is too small for the line. I had the same problem. -AN lines have Stainless steel braiding which make it very difficult for the hose clamp to ensure a ploper clamp. You have three options:
1) Use a rubber heater hose if you are using a hose clamp 2) Use -AN fittings with -AN line 3) Use the correct size barb with the supplied -AN line (5/8") Done deal ;) |
Re: Bitch ass oil leak
sure its not that weld leaking?
|
Re: Bitch ass oil leak
My stealthmode return leaked a liiiiiiiitle bit at first, but then all I did was tighten the ---- out of the hose clamp with a socket (not a screwdriver like the first time) and it's all gravy baby :6
|
Re: Bitch ass oil leak
Originally Posted by jagojon3
My stealthmode return leaked a liiiiiiiitle bit at first, but then all I did was tighten the ---- out of the hose clamp with a socket (not a screwdriver like the first time) and it's all gravy baby :6
|
Re: Bitch ass oil leak
The weld isnt leaking, I checked it pretty thuroughly before I put the oil pan back on. The bottom fitting is one that I actually got from Lowes (steel) and had to grind some around the sides for the line to fit over it. I guess I'll try to tighten that bitch with a socket too.
I'm far too lazy to relace that ---- with an AN fitting. |
Re: Bitch ass oil leak
honestly i would take very thin rubber line the inside of the tubing kind of make like an insert and put it back on and clamp it down , might work
|
All times are GMT -5. The time now is 05:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands