Birth of my 3" exhuast!
 

While my car is in the air waiting for the parts for a new HG I fiqured I pop up some pic of what I did Saturdays with a welder, bandsaw and 130.00 CAN of materials (3"Flex Pipe and 10 Ft for Pipe)

First the hacked up 3" to 2.25 to 2.5 to 2.25 that will be replaced
http://www2.propichosting.com/Images/421618549/1.jpg
First cut a slash peice of 3" pipe. I used mostly 7.5deg cuts so 6 cuts makes 90deg. It gives a nice smooth flow without taking to long to make a bend.
http://www2.propichosting.com/Images/421618549/5.jpg
First to bends created, To the Gas tank and then around it
http://www2.propichosting.com/Images/421618549/3.jpg
My Flex pipe and ball flange
http://www2.propichosting.com/Images/421618549/4.jpg
Hanging a little low because the DP is disconnect because of the HG job I'm doing
http://www2.propichosting.com/Images/421618549/6.jpg
Fits Tight!
http://www2.propichosting.com/Images/421618549/7.jpg
The only part not 3" is the muffler that will be replaced once my funds come back up!
http://www2.propichosting.com/Images/421618549/8.jpg
Good Clearance around the tank
http://www2.propichosting.com/Images/421618549/9.jpg
Finally th money pic!! See I'm represently Canada!! oh ya EH!
I've got good clearance over the LCA, just need to put my Sway bar back on.
http://www2.propichosting.com/Images/421618549/10.jpg

Over all it is much quiter then my 2.25 with Ricer Cannon Style muffler, I love the sound. I actually datalog boost coming in about 400rpm earlier so I'm REALLY HAPPY with it!! And who says muffler shops are required!!

Re: Birth of my 3" exhuast!
 

awesome looking work man! clean

Re: Birth of my 3" exhuast!
 

very nice work.

Re: Birth of my 3" exhuast!
 

mad ups to you for that. ---- looks good!

Re: Birth of my 3" exhuast!
 

I like. Real nice welds too. So you are just running a flex, piping, then muffler?

Re: Birth of my 3" exhuast!
 

Nice man..
Looks like my 3-3.15" exhaust
Mine is also all made with Whitey bends. even mine downpipe and half my charge pipes.

Re: Birth of my 3" exhuast!
 

looks good it's alot of work but worth it

Re: Birth of my 3" exhuast!
 

Weld were working good till I ran out of wire 15min after the store closed and had to borrow some .035. My little 110v welder I was using didn't like melting this thickness of wire so the welds after the muffler look like ----, but I'm replacing that. I want to go to a 3" magnaflow soon.

3" DP w/side exit for track to a 3" Carsound Cat to a 3" Ball Flange to a 3" Flex to 3" Pipe to a No Name 2.5 " Muffler.

Also it turns out that my brand new 3" Cat(30.00 bones off ebaY) from running rich for too long, No biggy, at least it still loks like I have a Cat on her. I'm going to wled a 3" pipe through it next time my DP is off so that all the exhaust doesn't get too turbulent in there.

Re: Birth of my 3" exhuast!
 

nice job, like the 90d bends :P, good job thow

Re: Birth of my 3" exhuast!
 

looks VERY clean 8)