HomemadeTurbo - DIY Turbo Forum
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Best way to mount this JRC 5 in on eg (https://www.homemadeturbo.com/forced-induction-7/best-way-mount-jrc-5-eg-38839/)

david_jones001 05-02-2005 06:27 PM
Best way to mount this JRC 5 in on eg
 
i think i seen a pic on the JRC website, that a guy have some brackets bolted to the top brackets that come on the intercooler, and put those in his bumper, what did u guys use to secure it to the bumper, what type of screws self tapping will hold that bitch on there good, thanks

95RedEX 05-03-2005 11:17 AM
Re: Best way to mount this JRC 5 in on eg
 
You probably want to use some bolts instead of screws.

ghettoturbo 05-03-2005 11:51 AM
Re: Best way to mount this JRC 5 in on eg
 
bah...i use self tappers to hold my ic on and have every other time as well

djfob 05-03-2005 11:59 AM
Re: Best way to mount this JRC 5 in on eg
 
I use zip ties :P

koreanwilcox 05-03-2005 12:36 PM
Re: Best way to mount this JRC 5 in on eg
 
I fabricated some L brackets and bolted them to the intercooler and the bumper support.

The hardest part was drilling through the damn bumper support. I need some new drill bits!

SpankedYA! 05-03-2005 04:43 PM
Re: Best way to mount this JRC 5 in on eg
 
Best way to mount this JRC 5 in on eg
In the front ;)

david_jones001 05-03-2005 05:03 PM
Re: Best way to mount this JRC 5 in on eg
 
Originally Posted by CSaddict
Best way to mount this JRC 5 in on eg
In the front ;)
ohhhhhhhhhhhhhhhh i see lol , i mean is bolting it down or screwin it in the best

HMT-Admin 05-03-2005 06:13 PM
Re: Best way to mount this JRC 5 in on eg
 
Bailing wire or Zip ties works great. Remember the charge pipes also help hold it up.


https://www.homemadeturbo.com/turbo_...cooler_1_P.jpg

https://www.homemadeturbo.com/turbo_...cooler_2_P.jpg

https://www.homemadeturbo.com/turbo_...cooler_3_P.jpg


This is a JRC oldschool 5in, but mounts up the same way.

samson 05-03-2005 06:39 PM
Re: Best way to mount this JRC 5 in on eg
 
You wouldn't happen to know the measurements on your bumper gap or the bumper hole would ya? I just want to get an IC big enough to fill my 98 Civic Coupes bumper hole. Preferably the core and the endtanks are hidden just like your set-up. That looks REALLY good BTW. Holla Back! ;) Thanks!


JP

HMT-Admin 05-03-2005 08:08 PM
Re: Best way to mount this JRC 5 in on eg
 
Originally Posted by samson
You wouldn't happen to know the measurements on your bumper gap or the bumper hole would ya? I just want to get an IC big enough to fill my 98 Civic Coupes bumper hole. Preferably the core and the endtanks are hidden just like your set-up. That looks REALLY good BTW. Holla Back! ;) Thanks!


JP
Nope we did that setup over 3 years ago


All times are GMT -5. The time now is 05:57 PM.
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands