best sohc turbod ?
#43
Re: best sohc turbod ?
People have put down 300+ whp on stock Z6 motors with stock compression. It's only logical to think with even lower compression on the stock Z6 tuning would be easier and more power on pump gas could be made. How many Vitara setups do you see making a lot of horsepower? A lot being 400whp... 1? ---- you barely see any making 300whp and running 11's.
My previous statement still stands. Vitara pistons are gay as hell. Eat top ramen for a few months and get a good set of pistons. Don't half *** your pistons if your going to build the motor.
My previous statement still stands. Vitara pistons are gay as hell. Eat top ramen for a few months and get a good set of pistons. Don't half *** your pistons if your going to build the motor.
#45
Re: best sohc turbod ?
i never said they were "good" but they are better than stock .. sure if stock were lower c/r they'd be better, and if there were forged they'd be even better, but there not! vitaras > stock z6, they're cheaper and have hit higher hp numbers
#47
Re: best sohc turbod ?
Originally Posted by beerbongskickass
With that low of a compression and good tuning I bet the stock pistons would hold too.
#48
Re: best sohc turbod ?
Originally Posted by Dmc1
I say f22a1. 8.8:1 compression and 2.2 litres for a little more torque.
Just picked up anouther complete f22 engine (in pieces) for 60$, and I picked up anouther head an block for free out of someone's garage. Cheaper then D blocks
#49
Re: best sohc turbod ?
Originally Posted by beerbongskickass
Your right, but still, a good set of pistons aren't that much more when you add what is costs to build the motor. Just do it right the first time, that's all I am trying to say.
#50
Re: best sohc turbod ?
Originally Posted by Atticus
stay away from d15b7.
no pull after 5500 rmp and flows like ----.
I think you can safely rev a stock z6 higher then an a6 thx to vtec and stronger valve train.
no pull after 5500 rmp and flows like ----.
I think you can safely rev a stock z6 higher then an a6 thx to vtec and stronger valve train.