HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Best head gasket for Turboed Honda?? (https://www.homemadeturbo.com/forced-induction-7/best-head-gasket-turboed-honda-55079/)

homicydalboy 02-01-2006 09:31 PM

Best head gasket for Turboed Honda??
 


What is the best head gasket to use. I heared that the buddy club ones are nice and I heard that Cometic head gaskets are really good when going boost. They lower your compression a lil bit and they are stronger than a OEM replacement.

But I dont know? I dont even know if mine is going out it is only leaking oil from right above the block stamp, only in that corner. Maybe the head stud backed off on torque a little bit? The head gasket is only like 5000 mile old!! Why would it leak there and only there. There is no anifreeze in the oil either.

I am stumpped :1

SkunT 02-01-2006 09:33 PM

Re: Best head gasket for Turboed Honda??
 
used one with copper spray :D

NBLKID 02-01-2006 09:40 PM

Re: Best head gasket for Turboed Honda??
 
jb weld ;)

bumblezc 02-02-2006 11:24 AM

Re: Best head gasket for Turboed Honda??
 
Dount your head gasket is leaking the oil.

Best Gasket: OEM with Copper Spray.

Semnos 02-02-2006 12:33 PM

Re: Best head gasket for Turboed Honda??
 
Most b-series leak oil at that corner....don't know why, but it's known amongst honda enthousiats that it happens alot.
most people use OEM..they are one of the best HG you can get.
unless if you want to lower compression you can get a Cometic at the thicknes you want to lower it

DAVe 02-02-2006 01:00 PM

Re: Best head gasket for Turboed Honda??
 
i know it costs more than a stock head gasket and copper spray, but i'd recommend a cometic head gasket. :y

91efate 02-02-2006 01:45 PM

Re: Best head gasket for Turboed Honda??
 
just ordered my hks 0.7mm

horrse 02-16-2006 09:44 AM

Re: Best head gasket for Turboed Honda??
 
OEM and cometic are the best out there IMO

0b00st0 02-16-2006 11:12 AM

Re: Best head gasket for Turboed Honda??
 
If you're leaking oil there, check the VTEC solenoid gasket and the o-ring for the VTEC pressure switch. If that doesn't work, check the o-ring on the distributor and the 10mm hex plugs that hold in the rocker arm shafts they have an aluminum crush washer that you can replace. Most people think that b-series leak oil from the headgasket. The only spot there that could leak oil is from the VTEC oil supply which is on the intake side. There are many other easy things that could be leaking and nobody every bothers to check those first.

hotrex 02-16-2006 12:11 PM

Re: Best head gasket for Turboed Honda??
 
eristic gaskets for me....


All times are GMT -5. The time now is 05:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands