b20 vtec on boost
how much boost can a b20 vtec with piston and rods and a block guard hold
|
Re:b20 vtec on boost
8-10psi tops.. tuned perfectly and a weak timing map.
https://www.homemadeturbo.com/ride/89si2/dead2.jpg https://www.homemadeturbo.com/ride/89si2/dead3.jpg no need to put a block guard in, b20 sleeves crack from the inside out. Monolithic desinged sleeves are the weakest b-series sleeves. This b20 block was pinned and cracked sleeves at 12 psi on a 4th gear pull. Jeff |
Re:b20 vtec on boost
12 psi on a 4th gear pull. |
Re:b20 vtec on boost
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
Originally Posted by td-civ
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
i was told that i can run 15psi when i race and 8 on the street i just want to know if that i can or not
|
Re:b20 vtec on boost
Originally Posted by td-civ
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
The monolith was that large black thing that all the monkeys were worshipping in 2001: Space Odyssey
|
Re:b20 vtec on boost
Originally Posted by AbaZ
8-10psi tops.. tuned perfectly and a weak timing map.
|
Re:b20 vtec on boost
Originally Posted by td-civ
Originally Posted by AbaZ
8-10psi tops.. tuned perfectly and a weak timing map.
no need to put a block guard in, b20 sleeves crack from the inside out im using total seal rings and je pistons it wont do that |
All times are GMT -5. The time now is 07:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands