b20 vtec on boost
how much boost can a b20 vtec with piston and rods and a block guard hold
|
Re:b20 vtec on boost
8-10psi tops.. tuned perfectly and a weak timing map.
https://www.homemadeturbo.com/ride/89si2/dead2.jpg https://www.homemadeturbo.com/ride/89si2/dead3.jpg no need to put a block guard in, b20 sleeves crack from the inside out. Monolithic desinged sleeves are the weakest b-series sleeves. This b20 block was pinned and cracked sleeves at 12 psi on a 4th gear pull. Jeff |
Re:b20 vtec on boost
12 psi on a 4th gear pull. |
Re:b20 vtec on boost
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
Originally Posted by td-civ
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
i was told that i can run 15psi when i race and 8 on the street i just want to know if that i can or not
|
Re:b20 vtec on boost
Originally Posted by td-civ
im using total seal rings and je pistons it wont do that
|
Re:b20 vtec on boost
The monolith was that large black thing that all the monkeys were worshipping in 2001: Space Odyssey
|
Re:b20 vtec on boost
Originally Posted by AbaZ
8-10psi tops.. tuned perfectly and a weak timing map.
|
Re:b20 vtec on boost
Originally Posted by td-civ
Originally Posted by AbaZ
8-10psi tops.. tuned perfectly and a weak timing map.
no need to put a block guard in, b20 sleeves crack from the inside out im using total seal rings and je pistons it wont do that |
Re:b20 vtec on boost
as I Have learned. a b20 is nothing more than a bored B18. so you have paper thin cyl. walls. so no. I wouldnt run high boost. maybe 6psi at most.
|
Re:b20 vtec on boost
Originally Posted by td-civ
i was told that i can run 15psi when i race and 8 on the street i just want to know if that i can or not
Trust me I know lots of guys who have broke sleeves in b20's. Its quite common for them to fail with fi applications. jeff |
Re:b20 vtec on boost
Originally Posted by sccaeg
as I Have learned. a b20 is nothing more than a bored B18. so you have paper thin cyl. walls. so no. I wouldnt run high boost. maybe 6psi at most.
b20 and b18 sleeves are nothing alike, b20's actually have very thick sleeves, but due to the weak design they are brittle as hell and crack. |
Re:b20 vtec on boost
READ http://dwolsten.tripod.com/articles/jan96a.html
then obviously the tons of people with cracked sleeves. |
All times are GMT -5. The time now is 04:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands