B18B with a Nissan turbo
 

I've wanted to do an HMT build for the longest time and new here it is. I have learned a lot from this site and love reading all the builds people post on here.


1996 Integra
Nissan turbo
Cheep ic pipes
big intercooler
CDM Blow off valve
Spring on the wastgate flapper
Chipped p75
DSM 450's
$20 boost gage from Harbor freight
Oil feed & ret (steltmode)
OBD1 injector plugs
OBD0 resistor box
Home made downpipe (with a stick welder)

Re: B18B with a Nissan turbo
 

we could really care less about what your CAR looks like, the setup is what counts.

Re: B18B with a Nissan turbo
 

Dame you guys are quik. I'm working on the pic's now.

Re: B18B with a Nissan turbo
 

no links

Re: B18B with a Nissan turbo
 

copy and paste ftw

Re: B18B with a Nissan turbo
 

I keep adding atachments from photo bucked and pressing post but notting happens. :1

Re: B18B with a Nissan turbo
 

copy and paste the IMG code

Re: B18B with a Nissan turbo
 

Re: B18B with a Nissan turbo
 

Attachment 9652
Attachment 9653
Attachment 9654
Attachment 9655
Attachment 9656

Re: B18B with a Nissan turbo
 

your exhaust is fail if it's oem with a turbo

Re: B18B with a Nissan turbo
 

The OBD2 injector plug's on my car could not be modifid to fit my dsm 450's so I had to cut them off and splice in some OBD1 plug's. The OBD1 plug's fit the 450's with no modification.

Attachment 9650
Attachment 9651

Re: B18B with a Nissan turbo
 

Yea it's only temporary. I realy just wanted to feal bust and see how much I was gona like it. So far I Love it. I'm only pushing 7psi and the exhaust is super quiet. LOL

I removed the inside pipe from that peace you see in the pic. So the id is atleast 2 in.

Attachment 9649

Re: B18B with a Nissan turbo
 

i like the carb spring boost controller

Re: B18B with a Nissan turbo
 

Re: B18B with a Nissan turbo
 

Re: B18B with a Nissan turbo
 

to the original poster nice ---- TEGRA btw how much dose that carb spring fluctuate the boost control as the snail gets hotter

Re: B18B with a Nissan turbo
 

Ripper vids


NOW

Re: B18B with a Nissan turbo
 

Tanks, I really like the tight turning radius compared the civics.

First and second it holds steady at 5 psi, third peaks all the way to 8 then slowly comes back down to 5 at WOT. I'm not sure about the temp of the snail but I never get on it when the engine is still cold.

Re: B18B with a Nissan turbo
 

Re: B18B with a Nissan turbo
 

Tank's for your help with the pic's. My camera phone doesn't make vids but I will barrow a camera tomorrow and make some.

Re: B18B with a Nissan turbo
 

Anyone who can't spell isnt recession proof.

Nice hmt setup.

Re: B18B with a Nissan turbo
 

LOL

Re: B18B with a Nissan turbo
 

I sent it out to have it powder coated and polished O0

Re: B18B with a Nissan turbo
 

hehe dat iz sou funni. For some reason I always want to spell word's a different way every time. I use spell check for every thing. LOL

Re: B18B with a Nissan turbo
 

Nobody caught that my SN is purposely spelled incorrectly.

Im disappointed. :3

Re: B18B with a Nissan turbo
 

sweet

Re: B18B with a Nissan turbo
 

I like it but Im curious with the IC piping running directly across the exhaust what kinda IATs you have.

Re: B18B with a Nissan turbo
 

The strait pipe in the picture is some really thick (1/4) aluminum that I had and I got it butting right up against the radiator too. Also the coupling Is one that I cut from some radiator hose L that was like 16 buck at autozone.

Attachment 9605

Attachment 9606

Re: B18B with a Nissan turbo
 

just run an open down pipe you silly son of a bitch.. i've had a 90* off my turbo for months now. :y

Re: B18B with a Nissan turbo
 

Hehe that's what I had at first. It's a lot quieter now but feels the same. I'm only pushing about 160.

Re: B18B with a Nissan turbo
 

Lol.. the stock motor is 140

Re: B18B with a Nissan turbo
 

LMAO. THATS ---- WAS TO FUNNY ;D
nice set up tho

Re: B18B with a Nissan turbo
 

It's 145. It's a 96 remember! lol

Re: B18B with a Nissan turbo
 

Thanks for all the comments guys. I made some vids today with a camera phone.

The first one is a 4 gear pull

The second one is just the hf boost gage

And the third is just a desert road

http://i640.photobucket.com/albums/u...id022309_2.jpg

http://i640.photobucket.com/albums/u...id022309_4.jpg

http://i640.photobucket.com/albums/u...id022309_1.jpg

Re: B18B with a Nissan turbo
 

Not a bad setup, what did you pay for everything?

Looks like you're running only 5lbs; you need to crank it up to 10 before you feel anything.

Re: B18B with a Nissan turbo
 

crank the boost up nog i was pushing somwhere above 15psi on bone stock ls just torqed the head bolts a little over to 65 ft.lb. spec is 61

and then i kept it at 10 with a little gift of 12 before it got to 5 k and stabalized down to 10

DIRTY LS FTW

OK so that old Nissan turbo was leaking oil from the turbine side probably due to a worn shaft piston ring. I needed another turbo but didn't want to spend to much and still needed to keep a/c and ps. I had some bad luck buying old turbos so I went for a CHING CHONG MIAOW!

The turbo was being sold for 135 but had an option to make an offer so I offered 130 and it was excepted. It came with an oil supply line and restrictor and for six dollars more you can get an oil return fitting with it. When I received the turbo I was very surprised to find something else in the box, and no it wasn't little grains of rice. It was a 1/2 in downpipe flange!

heres the oil supply and return fittings
Attachment 9232

and here is the turbo with part of the downpipe I made.
http://i640.photobucket.com/albums/u...ic030209_4.jpg

I made this downpipe with my new (to me) lincoln weld-pack hd 100
Attachment 9233

Much better looking exhaust, grind those welds man. DAMN! lol

You should purchase a wideband next. Good start, lovin where it's heading also.

I then went down to parkers and spent about $50 bucks to complete my oil return line I got an aluminum bulkhead fitting assembly, a -10an 90 and one foot of blue hose. I used some hondabond on the bulkhead and really cranked down on it so it wont leak.

Attachment 9229

Attachment 9230

Attachment 9231

I like your build man, fun stuff