B16A CRX turbo with AC?
Has anyone successfully put an HMT on a CRX with a B16A and kept the AC? If so, any pointers on getting everything to fit? I plan on using a half width radiator and thin fan, the turbo is still going to be only about an inch from the AC radiator. (what's the proper term for that?) The freon lines are in the way.
Oh, and I don't care if you think it's stupid to keep the AC. I am doing this for my own enjoyment, and I can't enjoy driving my car if I am hot, sweaty, and miserable. |
Re: B16A CRX turbo with AC?
ummmm. no
|
Re: B16A CRX turbo with AC?
Originally Posted by mhorton
Has anyone successfully put an HMT on a CRX with a B16A and kept the AC? If so, any pointers on getting everything to fit? I plan on using a half width radiator and thin fan, the turbo is still going to be only about an inch from the AC radiator. (what's the proper term for that?) The freon lines are in the way.
Oh, and I don't care if you think it's stupid to keep the AC. I am doing this for my own enjoyment, and I can't enjoy driving my car if I am hot, sweaty, and miserable. You could try to mount the turbo upside down off a log manifold and see if that helps with clearance but then you have to worry about the clearance between the turbo and your hood. |
Re: B16A CRX turbo with AC?
a log mani with a way offset turbo with compressor facing the passenger side may work if u hacked the ---- outta ur car to fit the half rad, a sidewinder style mani would work also....
|
Re: B16A CRX turbo with AC?
Thanks for the replies. Do you think I would be able to get a custom freon line to replace the one that loops around the fan and is entirely in the way?
|
Re: B16A CRX turbo with AC?
"Sidewinder" style, remove battery, and have you checked out Jeff's car. From the pics it looks like he has a ---- load of space up front. And yes any compotent AC shop should be able to make you some new lines.
|
Re: B16A CRX turbo with AC?
I've seen it done, with an HKS mani, T28, FMIC and loooong pipework. IIRC it had an unusual downpipe as well and needed some messing about with the exhaust flange too, plus had a Mugen kit giving enough space for the IC, but a full size rad. This was on a JDM SiR, turbo'd in Japan and imported into the UK. So you can do it, it will just take some planning 8)
|
Re: B16A CRX turbo with AC?
yep, you need custom lines, otherwise they'll burn the ---- up.
|
Re: B16A CRX turbo with AC?
I'd love to run a sidewinder, but $1000 is way out of my price range, especially when you factor in the cost of battery relocation, external wastegate, etc. Do they still sell the cast type? I don't see it on their site anymore.
|
Re: B16A CRX turbo with AC?
then make one prob cost 200 in materials
|
All times are GMT -5. The time now is 09:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands