Audi 5000 Wastegates - anyone using one?
#2
Re: Audi 5000 Wastegates - anyone using one?
try these
https://www.homemadeturbo.com/forum/...;threadid=3359
https://www.homemadeturbo.com/forum/...5040.msg517658
try using the google search for now:
audi wastegate site:homemadeturbo.com
https://www.homemadeturbo.com/forum/...;threadid=3359
https://www.homemadeturbo.com/forum/...5040.msg517658
try using the google search for now:
audi wastegate site:homemadeturbo.com
#4
Re: Audi 5000 Wastegates - anyone using one?
Yeah, they are missing a few pictures.
I hooked mine up today to a pressure regulator and I have the 4 psi wastegate. One thing missing from those threads was wether a MBC could be used with them for boosting over 20 psi?
I will have to hook up an MBC and a pressure regulator and see. I have the time.
I hooked mine up today to a pressure regulator and I have the 4 psi wastegate. One thing missing from those threads was wether a MBC could be used with them for boosting over 20 psi?
I will have to hook up an MBC and a pressure regulator and see. I have the time.
#5
Re: Audi 5000 Wastegates - anyone using one?
some are adjustable from the factory, remove the brass plug on the top of the gate by drilling it out. Thread a m10x1.25?? (honda bellhousing bolt) into the top of it and if it pushes down, your golden. I was
#6
Re: Audi 5000 Wastegates - anyone using one?
Took mine apart.
Was/is not adjustable.
So....
Instead I will mill up aluminum inserts that I can "insert" and bench test for pressure.....
I will take photos.... But it may be a few days.
Was/is not adjustable.
So....
Instead I will mill up aluminum inserts that I can "insert" and bench test for pressure.....
I will take photos.... But it may be a few days.
#8
Re: Audi 5000 Wastegates - anyone using one?
I did the insert thing.....
It raised it a few psi, max of 7 psi. but... It makes it so the valve cannot open as much. So its not a great fix....
However, on the top of the wastegate is a small vacumn nipple. The wastegate is actuated by a BIG tube.... So I am thinking that the vacumn/boost nipple is to be used to control the wastegate psi.
I think that instead of hooking up the MBC to the main vacumn/boost line, you would hook it up to the top smaller one. And then use the MBC in REVERSE! So you would allow boost to enter the top of the chamber and fight the force of the boost entering the lower chamber. Basically you would be adding boost via the MBC versus bleeding the boost. Make sense?
I have some pressure regulators and an extra MBC and will rig this up and see if it works.
It raised it a few psi, max of 7 psi. but... It makes it so the valve cannot open as much. So its not a great fix....
However, on the top of the wastegate is a small vacumn nipple. The wastegate is actuated by a BIG tube.... So I am thinking that the vacumn/boost nipple is to be used to control the wastegate psi.
I think that instead of hooking up the MBC to the main vacumn/boost line, you would hook it up to the top smaller one. And then use the MBC in REVERSE! So you would allow boost to enter the top of the chamber and fight the force of the boost entering the lower chamber. Basically you would be adding boost via the MBC versus bleeding the boost. Make sense?
I have some pressure regulators and an extra MBC and will rig this up and see if it works.
Thread
Thread Starter
Forum
Replies
Last Post
draztik
General Discussion
8
04-08-2004 10:42 AM
1.6 sohc d16z6
Forced Induction
2
02-13-2004 09:44 PM