Anyone used an rhb5 on an F23?
06-06-2004, 11:07 PM
#12
3.0 BAR
Join Date: May 2003
Posts: 3,365
Re:Anyone used an rhb5 on an F23?
Originally Posted by AbaZ
I didnt beg for you to mod dipshit.. 
Well you did tell me that I couldn't have anymore g/fs since they would distract me from making fun of people in the FI section. :P
06-06-2004, 11:13 PM
#13
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:Anyone used an rhb5 on an F23?
Sorry, I just had to made that clear.. I dont beg :P
And I did ask you that because I didnt want a moderator that made 2 posts and leaves for a year then comes back, posts a bunch and then leaves again.
Anyway, back on thread topic, A t3/t4 is going to be kind of on the expensive side, there is a lot kid at my work I am trying to setup a 14b (dsm 1g turbo) on his f23 accord, I think it will be a really good match for that engine.
Jeff
And I did ask you that because I didnt want a moderator that made 2 posts and leaves for a year then comes back, posts a bunch and then leaves again.
Anyway, back on thread topic, A t3/t4 is going to be kind of on the expensive side, there is a lot kid at my work I am trying to setup a 14b (dsm 1g turbo) on his f23 accord, I think it will be a really good match for that engine.
Jeff
06-06-2004, 11:29 PM
#14
3.0 BAR
Join Date: May 2003
Posts: 3,365
Re:Anyone used an rhb5 on an F23?
It's all good man, I ain't going anywhere. Now I have to stay around and find a way to ---- with your *** back.. oh the joys of revenge. 
Figure I can make some things entertaining, not that much fun ------- with only Kevin. I'll have to get creative in my approach.
Back on topic...
Isn't the F23 share the same bolt pattern as the F22 & H23? If that's the case you could remove the front motor mount and install a DSM manifold for ultimate cheapness. I really want an f22a1 to play with next.. I've done work on them before, but no FI work.
-ryan
Figure I can make some things entertaining, not that much fun ------- with only Kevin. I'll have to get creative in my approach.
Back on topic...
Isn't the F23 share the same bolt pattern as the F22 & H23? If that's the case you could remove the front motor mount and install a DSM manifold for ultimate cheapness. I really want an f22a1 to play with next.. I've done work on them before, but no FI work.
-ryan
06-06-2004, 11:33 PM
#15
3.0 BAR
Join Date: May 2003
Posts: 3,365
Re:Anyone used an rhb5 on an F23?
Originally Posted by AbaZ
had to made that clear.. I dont beg
06-07-2004, 10:21 AM
#18
0.0 BAR
Thread Starter
Join Date: Jun 2004
Posts: 16
Re:Anyone used an rhb5 on an F23?
anyone know where I can find a compresson map for the 14b turbo? Sounds like an alternative that might be worth checking into, especially if I could use a DSM manifold with it too. Damn that would save some money - not sure the manifold will fit though, I've never heard that b4. Off to h-t to find out...
06-07-2004, 01:26 PM
#19
3.0 BAR
Join Date: May 2003
Posts: 3,365
Re:Anyone used an rhb5 on an F23?
Many members have verified that the 4g63 dsm exhaust manifold matches up to the F22 (that includes F22a1/4/6, F22b1/2). The H23 shares the same exhaust side pattern as the F22 (according to articles on H-T and accordinly done {i think}). Just find out of the F23 is the same as the F22, I would say that it is.
Do a search in this forum for someone who has used the DSM manifold, they say that some of the bottom holes will have to be enlarged for proper fitment, but it does seal up. Oh yeah, forget about the front motor mount.
Read this if you have time:
http://www.honda-tech.com/zerothread?id=776837&page=1
I'm going to register there to post just for that topic.
-ryan
Do a search in this forum for someone who has used the DSM manifold, they say that some of the bottom holes will have to be enlarged for proper fitment, but it does seal up. Oh yeah, forget about the front motor mount.
Read this if you have time:
http://www.honda-tech.com/zerothread?id=776837&page=1
I'm going to register there to post just for that topic.
-ryan
