http://www.newbieforces.com/files/PICT1208.JPG

http://www.newbieforces.com/files/PICT1206.JPG

http://www.newbieforces.com/files/PICT1205.JPG

http://www.newbieforces.com/files/PICT1204.JPG

http://www.newbieforces.com/files/PICT1202.JPG

http://www.newbieforces.com/files/PICT1201.JPG

http://www.newbieforces.com/files/PICT1200.JPG

http://www.newbieforces.com/files/PICT1199.JPG

 

Man!Those are some ------- nice red Xs!!

 

CAN SOMEONE PLEASE TELL ME HOW TO LOAD MY ------- PICS!!

 

Well it looks like the problem was loading them on to newbieforces.Are they jpeg?If not that might be the problem.Check them on your hard drive and see if you have them saved as jpegs.

 

http://www.newbieforces.com/files/PICT1206.JPG

 

Looks pretty good. Any problems with that Deltagate? I'll be running one soon too.

 

I wanna thank everyone in this site for helping me in so many ways figure out so many turbo related stuff. I owe you big time. my set up is as follows;

JDM spec B18c GSR--bone stock
Garret t3/t4 .63 A/R exh. 57 trim--this ---- kicks ***!!
used Drag header
Turbonetics deltagate 8PSI
Tyrus FMI
DSM BOV (JB welded)--this ---- sounds good
custum IC piping 2.00" from turbo to IC, 2.25" from IC to throttle plate
RC 440cc injectors
Hondata with boost option
silicone hoses and clamps from turbopiping.com
steel braded oil feed and return
Walbro 255 in tank pump
used drag downpipe and dump tube
OBX race Cat
DC sports 2.5 cat-back
Exedy racing organic clutch--So far is holding!

On the DRT (DRTracing.com) Dyno, this baby was tuned and put down 242.60 wheel HP and 188.24 ft-lbs of torque at a conservative 8 PSI. I will load my dyno sheet soon.

The thing I love the most is the sound of the DSM BOV. This thing sounds good. I do have a little lag but at 4500 RPM all hell brakes loose.

 

No problem at all with the deltagate. I plan to connect the dump tube to downpipe eventually due to the fact that I smell exhaust alot when it opens up.

 

nice setup

 

Thanks