Always go through Blaast performance!!!
traded for a turbo that was in decent condition untill i found out the truth!
sent it to Blaast performance and within a day of having it he's done and sends me this!! that snail was fucked up! *Ok the turbine end bearing was welded in the center section. impossible to take it out! The turbine end piston ring wasn't on the shaft anymore! It was thorn apart in the center section! i never saw that! THe turbo is repaired now. No shaft play. Spins freely. It was rebalanced to perfection, sandblasted and polished like a new and it's ready to go. i warranty the job for 6 months. Here'S your invoice for the rebuild: basic Preventive rebuild..................................... ***extra parts charged*** Replacement compressor wheel 60 trim............. replacement center housing................................ Stagger gap turbine end piston ring upgrade........ Dynamic seal thrust system upgrade....................* NOw that was one fucked up turbo... THanks again Blaast for the hook up! you guys did great! we'll see if he has any pics but i dont think so... |
Re: Always go through Blaast performance!!!
So how much did it total to? About 300 bucks or so?
|
Re: Always go through Blaast performance!!!
under 300 but i know it was well worth it...
|
Re: Always go through Blaast performance!!!
pics nagga thats good now we have a great place to send all the busted ssac turbos
|
Re: Always go through Blaast performance!!!
I've always bought my turbos from Blaast. He's very easy to deal with and he's in Canada so its convenient for me. :P
|
Re: Always go through Blaast performance!!!
Originally Posted by SmellySOHC
under 300 but i know it was well worth it...
|
Re: Always go through Blaast performance!!!
I've heard great things about blaast and I am sure their re-builds are top notch. Just dont buy their used stuff, especially off ebay.
** Begin Threadjack ** I picked this up to play with on my project. http://cgi.ebay.com/ebaymotors/ws/eB...tem=8069115340 From that ad it seems like its in good shape and perfect for a small d16 turbo setup. A week before the turbo arrived I have several emails going back and forth with blaast saying that the turbo is to small for a d16 no matter what the HP goals are. And that the turbo will require a rebuild before any installation. I get the turbo, sure enough there is shaft play and a nice metal on metal grinding sound when I spin it with my fingers. ** End Threadjack ** |
Re: Always go through Blaast performance!!!
i bought my injectors to he (blaastpeformance).. and i hope to buy turbo and other stuffs to he too. :y i recommend it !
|
Re: Always go through Blaast performance!!!
Originally Posted by Walter
i bought my injectors to he (blaastpeformance).. and i hope to buy turbo and other stuffs to he too. :y i recommend it !
A little english lesson for ya ;) |
Re: Always go through Blaast performance!!!
oh yes.. thank you! :D i appreciate it!
|
All times are GMT -5. The time now is 06:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands