|
Re: almost ready, minor things now :D
Originally Posted by c0mpl3x
you can't do that and not build pressure. you'll still spin ---- around just as fast if you don't add air., you need to either clamp a big washer for backpresssure, or set it with a wastegate on the charge pipe
i need to either block off the charge pipe and run my bov and wastegate set at a low psi or "clamp it with a big washer" like you say which still lets air out, builds back pressure and the bov and waste gate are controlled via a boost controller set to a low psi. correct me if im wrong again, i know im a :1 when things are not explained precisely, sorry. i am also able to loop the compressor outlet to the inlet of the turbo with a bov, and run a wastegate with it like you say? thanks complex. your helping a lot if ya dont think ya are. honestly!! |
Re: almost ready, minor things now :D
if you look compressor to compressor there is no air being added to build boost. you'll still over rev.
as long as you can get air ino the turbo, that hasn't already taken a trip through the turbo, you're good to go. |
Re: almost ready, minor things now :D
Originally Posted by c0mpl3x
if you look compressor to compressor there is no air being added to build boost. you'll still over rev.
as long as you can get air ino the turbo, that hasn't already taken a trip through the turbo, you're good to go. |
Re: almost ready, minor things now :D
Originally Posted by 78NOVA
ok i think now ill go with you said the first time. a nice sized washer to cover the hole on the charge pipe and make sure the wastegate and bov are in working order. ahh HMT is such a great place.....im a ;D :8 right about now...
|
Re: almost ready, minor things now :D
Originally Posted by c0mpl3x
bov need not work, you already have a vent to atmosphere. a 1/2" hole should work fine
|
| All times are GMT -5. The time now is 10:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands