AiResearch M10? any info?
 

Looks to be almost the same size as my T3, does anyone know the specs on this turbo? It came off of an 84 daytona

Re:AiResearch M10? any info?
 

i have one for my project.

mine is .42 ar cold .48 ar hot...
don't know anything else about it flow charts ext...

Re:AiResearch M10? any info?
 

dont flame for my ignorance, but what does the term AR mean? as in "mine is .42 ar cold .48 ar hot..."

Re:AiResearch M10? any info?
 

I have a Ai Research M10 turbo also. its .42 and .68. It came off a 84 nissan 200sx. Its a t-2 turbo factory set wastegate at 5psi. This is all i know so far untill i get it on :)

Re:AiResearch M10? any info?
 

The turbo you have is a Garrett T3, The M10 is the casting number on the air housing and Aireserch is a division of Garrett industries(before they sold out to allied signal). This is a good turbo , but difficult to work with because of the strange exhaust housing shape, and the fact that it is backwards from every other T3 turbo. I dont know what A/R stands for but it is Garretts way of rating turbo size, the larger the number the biger the turbo and the larger the motor it is used on. .48A/R exhaust .42A/R air turbos are the most common 4 cylinder turbos, they were used on all of the turbo imports(SAAB,Volvo,ect.)and are good for motor sizes from 1.5 L up to 2.5 L and 5 to 30 PSI of boost.