Aftermarket crossmembers for a turbo crx.. any good ones?
 

In the middle of my turbo project running into a clearance problems. I have a 91 crx with a b16 running a t3/t4 with a stainless steel manifold and 3" downpipe also running a 94 civic radiator. Ofcourse with the stock crossmember my downpipe doesnt come close to fitting and neither does the charge pipe comming off the turbo since that points strait down.

Was wondering if anyone is using those aftermarket crossmembers. I was looking at the one they have at stealthmode performance. It looks like my piping would clear but i might have problems with my radiator since mine comes down almost as far as my tow hooks do and right in line with them. I suppose I could do come cutting to move the radiator around but was wondering if anyone else uses these in thier setup and can maybe show some pics of how thier stuff clears.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

I no longer carry traction bars/crossmemebers for 88-91's. Sorry.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

ah man.. bummer those looked pretty good and didnt really like the idea of those mild steel ones they have on ebay. any other good crossmembers out there? friend of mine has a gym fab one or something like that but it still doesnt have room for the 3" downpipe without some problems.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

there are a few guys selling em on here I think. Maybe one of them will chime in. BumbleZC something like that? had some for pretty cheap.

Or make ur own if you got balls.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

I did make them but I have put it on pause for a bit. The man reason that I lost my jig (my car because it is back on the road). If anyone local to London Ontario or so wants to come to my shop some saturday so I can use there car, I will make you one for free. The reason I don't want to remove mine is I just got it al set-up the way I like it and paid for my alignment so I don't want to loose me settings.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

my full race bar in my crx gives me a ---- load of clearance plenty enough for a 3" dp :P

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

do you have the 90-93 integra crossmembers yet?

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

Let me rephrase that. I don't carry any traction bars for any car right now.

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

any plans too again?

Re: Aftermarket crossmembers for a turbo crx.. any good ones?
 

I'm working on a few things. I can't say wether I'll sell them again or not.