Adjusting the boost on IHI RHB52 turbo?
 

So I found this IHI RHB52 turbo off of a 1988 Ford Thunder Bird Turbo Coupe. I know that the factory external waste gate on the turbo is set at around 10 psi for the auto and 14 psi for the manuals. However I don't want to run this much on my D-series honda motor. How would I be able to lower the psi on this turbo to around lets say 7 psi?

Re: Adjusting the boost on IHI RHB52 turbo?
 

you will have to get an external waste gate that will run 7 psi

it is however a waste of time , if you wanna boost seven, get a smaller turbo

that thing wont spool untill about 5000rpm on a 1600

Re: Adjusting the boost on IHI RHB52 turbo?
 

what, 5000rpm, thats a .48 exhaust side, should see 8-10psi by 3500rpm w/ no leaks. i would think anyways.

Re: Adjusting the boost on IHI RHB52 turbo?
 

Go smaller than an rhb5? Your kidding right.

External wastegate or do a search for adjusting the internal gate to get 7psi.

Re: Adjusting the boost on IHI RHB52 turbo?
 

Maybe I'm not looking in the right places but I havn't found anything expaining how to do this.

Re: Adjusting the boost on IHI RHB52 turbo?
 

yep, looking in the wrong places

Re: Adjusting the boost on IHI RHB52 turbo?
 

In short, you lengthen the actuator rod to decrease boost, or you clip a small piece off the spring. More of a trial and error way of doing it.

Re: Adjusting the boost on IHI RHB52 turbo?
 

^ Yep, you dont have to run a exsternal WG to get lower boost. I removed my actuator on my T25 and used just a spring, I have it set to 5psi now, to run more all I have to do it tighten the spring. On my IHI I just cut the WG rod and threaded the ends and used a coupler to join the ends back together, that way it's adjustable by turning the coupler.

Re: Adjusting the boost on IHI RHB52 turbo?
 

Sweet thanks guys!

Re: Adjusting the boost on IHI RHB52 turbo?
 

you can always use a WG from one of the saabs or Tbird tubos with the treaded piece that attaches to the flapper on the turbo.