ADAPTER PLATE
02-17-2003, 11:26 AM
#1
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 4,401
ADAPTER PLATE
OK guys i need help. my kit is almost done. i found a hf manifold at the junk and bought ti for 15 bucks.im going to be hooking it up to a t3. ineed tomake the adapter and dont knwo where to start. where can i find a nice square 3/4" thik piece of steel? what about the studs? i seen in the site that their using pathfinder exhaust studs but when i go to the autoparts store what year should i ask for?? man i getting anxiuos, please help?!! after this i need to get a downpipe made but i want to do this first. thanks
02-17-2003, 01:02 PM
#3
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
02-17-2003, 01:16 PM
#4
Guest
Posts: n/a
Re:ADAPTER PLATE
Yes, read the Adapter Plate article. All the information on how to make them and what NOT to do is there.
If all else fails, take the two gaskets, and a picture of the a plate from that section to a machine shop and have them whip it up for you. Very simple. Shouldn't take them more than 2 hours.
If all else fails, take the two gaskets, and a picture of the a plate from that section to a machine shop and have them whip it up for you. Very simple. Shouldn't take them more than 2 hours.
02-17-2003, 05:49 PM
#5
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 4,401
Re:ADAPTER PLATE
ya beleive me i ve read that article more than a couple of times, but do you know where i can find the steel plate at??im gona try to do it myself at my auto shop class but need the plate. a machine shop would probably sharge too mcuh for 2hrs of labor. thanks
