Re: Accord Turbo Problem. Help!!!!!
 

+1

Re: Accord Turbo Problem. Help!!!!!
 

nice try but it seems like you need to go back to the drawing board

Re: Accord Turbo Problem. Help!!!!!
 

:), well about the BOV, you said to connect the nipple to the FPR vacuum source, but on my BOV (Type S Greddy), there are TWO nipples. One on the Top (not the tip but on the side), and a smaller nipple at the bottom (also on the side) but lower than the bigger one. How do i know which one is vauum source to connect to the FMU and what's the other one good for???. About the Boost Gauge, i got me a 52mm Tinted Boost Gauge off Eba. On the back of it there's a plastice Tupe. I'm assuming that tupe needs to go to the Top of my Wastegate or something?? And can anyone tell me how to post the pictures on so it's easier to view? i have them in my Desktop but when i click on the Insert (to post) there's this HTML code and i have no idea where to find the Address of my picuture to put in the middle.

Re: Accord Turbo Problem. Help!!!!!
 

Wow, you need to do a lot of research before doing anything else. Basically everything you just said was wrong.

Re: Accord Turbo Problem. Help!!!!!
 

where are u located at?... u need some help with this bud...

Re: Accord Turbo Problem. Help!!!!!
 

Base on what people have told me to do. Well, if you think it's wrong. What do you think i should do. About My location, i'm in Memphis, TN if that's the location you're talking about. Well, tell me what you guys think about my Fuel system. Some people said i'm dumping tooo much fuel into my engine by using 450cc with the FMu, some people said I don't need FMU and some people said i just need to replace the Stock Injectors Back. Let me ask you guys this, if the turbo spins and no noise what soever, no oil leaking, no dent that means the turbo is working fine right??? Cause i'm afraid something may be wrong with the Turbo but not the Fuel. But just tell me w hat you guys think I should Do cause there are different ways to do it and i'm not sure which.

Re: Accord Turbo Problem. Help!!!!!
 

Somebody please help this guy because I just don't have the patience.

I thought asians were supposed to know how to work on hondas and toyotas?

Re: Accord Turbo Problem. Help!!!!!
 

do more reasearch man i wouldn't buy anything that i dont know how to install in the first place...

Re: Accord Turbo Problem. Help!!!!!
 

wow, im sorry dude, but you're a ------- idiot!

You obviously didn't research enough. In the first place, you should be shot for using an FMU, then you should get shot again for using 450's.

read this ----:
all of it!
https://www.homemadeturbo.com/forum/...?topic=14497.0

DONT post back till you understand that ---- completely.

I have a question for you, if you bought a prefab kit, why the ---- are you on this site? Its called HOMEMADEturbo.com!!!!!!! Go to h-t or some other fag based forum.

Im ------ tired of noobs like this man!

-Jose

Re: Accord Turbo Problem. Help!!!!!
 

Here are a few pointers...im a newb so im not as sick of these stupid ass ?'s.

throw way the following items:
fmu
turbo
intercooler
injectors
bov
wastegate
turbo manifold
all piping
all gages

if your gonna go boost to it right. dont use a damn fmu...and buy a real tunning system not the "bandaid's" that someone elsed mentioned.
safc's and other piggyback systems are crap...people use them and have success but save up some money and get something like hondata or another standalone system. But FIRST THING DO A LITTLE BIT OF RESEARCH!!! but ya if i were you id throw away all that stuff....it will save YOU money inthe long run(2weeks in your case)