HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   88 Fiero GT. Engine swap. Custom turbo build. (https://www.homemadeturbo.com/forced-induction-7/88-fiero-gt-engine-swap-custom-turbo-build-97661/)

darkhorizon 11-27-2008 01:15 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 
Did he post that 430whp dyno graph yet?

I dont want to read any of this post, because this kid knows nothing about what he is talking about or doing. He says that turbo cars need a 27% correction factor in colorado.

TorganFM 11-27-2008 01:21 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 
Wicked... please don't wrap it around a tree.

SpankedYA! 11-27-2008 01:31 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 
Solid Noob post. Great build. That thing must be a handful to drive. Got any Vids?

Tom-Guy 11-27-2008 01:40 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by HiProfile
One thing about altitude for boosted cars, you actually make out like a bandit because of the decrease in exhaust backpressure. Its like running a 3.5-4" exhaust over a 2.5" exhaust.

Completely wrong. Ask Tony Palo why his TIP went through the roof when he was in Denver, compared to normal sea level venues. You basically overspin the ---- out of the turbo to flow a given airmass and there's a big frictional loss across it, making it a whole lot less efficient.


And, the OP is a failfag whose tuning ability is lacking. FYI, ability to make a correct n00b intro post complete with porn is directly proportional to ability to tune. $5 says if he posts porn his car won't run like peniswhistle.

Adam Hopkins 11-27-2008 01:41 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by darkhorizon
Did he post that 430whp dyno graph yet?

I dont want to read any of this post, because this kid knows nothing about what he is talking about or doing. He says that turbo cars need a 27% correction factor in colorado.

Your just pissed because he stole your thunder:

https://www.homemadeturbo.com/forum/...110#msg1210110

86 fiero 11-27-2008 02:36 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by darkhorizon
Did he post that 430whp dyno graph yet?

I dont want to read any of this post, because this kid knows nothing about what he is talking about or doing. He says that turbo cars need a 27% correction factor in colorado.

If you and Aaron wanna fight I would take it back to RFT. It won't be tollerated here , esp when it's 2 people with less then 20 posts and 0 porn.

This isn't RFT and Hammitt is no where to be found.

AaronZ34 11-27-2008 03:10 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by darkhorizon
Did he post that 430whp dyno graph yet?

I dont want to read any of this post, because this kid knows nothing about what he is talking about or doing. He says that turbo cars need a 27% correction factor in colorado.

There isn't a single component on your car, or your car as a whole, that even compares to my build. My car is on an entirely different level, and not only does it show, but the people here seem to agree.


Originally Posted by TorganFM
Wicked... please don't wrap it around a tree.

Thanks, and, well, too late. Not a tree, but I put it into a Ford Taurus a couple weeks ago :X


Originally Posted by CSaddict
Solid Noob post. Great build. That thing must be a handful to drive. Got any Vids?

Thanks! It is beyond a handful, so much that I don't even push its limits. Its ok in a straight line though, traction is fairly good, and when it spins, the backend stays inline. Here's the 3 vids I have:

Idle and freerev: http://videos.streetfire.net/video/8...rbo_193915.htm
0-75 highway onramp (8.7psi, ---- tune): http://videos.streetfire.net/video/8...rbo_193913.htm
Dyno vid: http://videos.streetfire.net/video/8...rbo_194049.htm


Originally Posted by Joseph Davis
Completely wrong. Ask Tony Palo why his TIP went through the roof when he was in Denver, compared to normal sea level venues. You basically overspin the ---- out of the turbo to flow a given airmass and there's a big frictional loss across it, making it a whole lot less efficient.

And, the OP is a failfag whose tuning ability is lacking. FYI, ability to make a correct n00b intro post complete with porn is directly proportional to ability to tune. $5 says if he posts porn his car won't run like peniswhistle.

Good point about the altitude. It just affects so much, that's it's hard to even guess at what it does, and it certainly won't be uniform for all cars, and all altitudes. My turbo is nowhere near being overspun, but it's definitely higher on the map.

The reason my tune was ---- isn't because I couldn't tune, it was because I was having a problem with the RPM pickup on my piggyback. That's since been fixed, and my tune is pretty solid right now. And I've already posted a few semi-nude pics!

bigdaddyvtec 11-27-2008 03:30 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by AaronZ34


Why? So I could lose another 500-1000rpm of spool time? As said above, I don't want, or need, anymore power up top. I'm already at the limit of my short block, and the car is wicked fast as it is.


You are grossly mis-informesd...

1. That turbos ex housing is too small for that thing. Period, and going to a T4 housing is NOT going to hurt spool anywhere near as much as you think.
2. You wont lose 1000s of rpms spool yime.
3. Its not ALL about top end power. but Iwont get into that as you obviously are m isinformed and Id rather ---- your mother than try to get you to understand
4. Your car isnt wicked fast... How do I know??? Because mine IS
5. DOnt be a faggot and ---- a halfway good noob post by being a faggot... There are alot of people around here whom built thewre own ---- who have nicer setups and make WAY more impressive numbers

By the way, your porn is lacking so is your ------- attirude, your car isnt all that, its neat... But its a ------- Fiero... Your attitude correlates wonderfully.




Did I mention its slow???



Originally Posted by Adam Hopkins
Your just pissed because he stole your thunder:

https://www.homemadeturbo.com/forum/...110#msg1210110


Oh Jesus ------- CHrist.... another douchebag???? FIgures. Dammit... My noob picker has been off for a hot minute...


Guess the first clue should have been it being a Fiero..... oh well, im just a sucker for different......





Next thing hell be telling me His car is faster than mine.....


SHiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiit

AaronZ34 11-27-2008 03:40 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 

Originally Posted by bigdaddyvtec

You are grossly mis-informesd...

1. That turbos ex housing is too small for that thing. Period, and going to a T4 housing is NOT going to hurt spool anywhere near as much as you think.
2. You wont lose 1000s of rpms spool yime.
3. Its not ALL about top end power. but Iwont get into that as you obviously are m isinformed and Id rather ---- your mother than try to get you to understand
4. Your car isnt wicked fast... How do I know??? Because mine IS
5. DOnt be a faggot and ---- a halfway good noob post by being a faggot... There are alot of people around here whom built thjewre own ---- who have nicer setups and make WAY more impressivef numbers

By the way, your porn is lacking so is your ------- attirude, your car isnt all that, its neat... But its a ------- Fiero... Your attitude correlates wonderfully.

Did I mention its slow???

1. It HAS a T4 housing already. That's why I ordered it witht he biggest turbine combo you could get on a 35R.
2. You're right, I won't lose any, because I'm not going to do it.
3. So a larger turbine will allow me to gain low end power, and spool time? Aside from the newer styles mentioned above, that's wrong.
4. I don't mean it's wicked fast compared to every other car on the road. I drive plenty faster cars on a regular basis. It's wicked fast for a Fiero. You'd have to drive one to understand.
5. I never said there weren't.

I bought a Fiero for a reason. I've got access to plenty of other cars that are "better" in your ignorant eyes. But it isn't about that. It's about what I wanted, and I've got it. The Fiero looks good to me. Just like people here that think their Honda looks good. I don't, but it isn't my car. Next, the Fiero is light. I've got the heaviest one ever made, and it weighed 2800 (Now sitting at about 2500). It's RWD. It hooks up better than AWD cars. I'm 6'4", and I fit comfortably, and easily. I chose the car for a reason, and you can't find me a better car at the same budget. I appreciate your input, and am open to ideas about improving its drivability and turbo response, but so far, you have't offered any constructive input. HiProfile did.

bigdaddyvtec 11-27-2008 03:57 PM

Re: 88 Fiero GT. Engine swap. Custom turbo build.
 
Jesus ------- Christ



Well at least you know how to spell you're according to context... Ill give you a cookie for that fior sure.



It needs a bigger snail.... IT WONT HURT spool NEARLY as much as you seem to think.... Dispolacement is on your side. What do I know, I drive a four door Accord,,, You dont have to tell me about being different. Ignorant??? You mlake me laugh ------, actually its sad you cant even piss me off. But anyone that thinks (even a mid engfine chassis) hooks up better than an AWD platform is a moron, or whomever they know that has said QWD fails at life (and driving).

I could give a ---- what you do with the car. Ive got fags on this site telling me to put my setup in a hatch/civic/teg all the ------- time as I destroy all that is beautiful (trannywisse) In my choice of platform. COntrary to your ------- skewed interpretation...

The ignorant one here in this threraad seems tyo be you thus far.

Post some ------- porn (Not some Mervynns bathing suit ads) and ull your head out of your boyfriends man -----.





All times are GMT -5. The time now is 09:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands