HomemadeTurbo - DIY Turbo Forum
Page 3 of 10
1
2
3
4
5
6
7
8
9
10
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   84 Civic HB ZC/D16A1-T build 56k (https://www.homemadeturbo.com/forced-induction-7/84-civic-hb-zc-d16a1-t-build-56k-91623/)

the 13th round 05-03-2008 11:59 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
nice build, ---- the low comp. just dont run a headgasket, some rtv would work great.

3gd16 05-04-2008 12:01 AM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Originally Posted by losesomethinbra
Yea I lurked there for a couple years til I got boosted... Very helpful for the FI conversion. No track time yet :( Just a few autox runs (found out not to bother without r compounds or slicks!) Next weekend I'll have it dyno'd so Ill post that up
Let me know how the dyno run goes.

memphis060 05-04-2008 04:18 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 


Nice, solid build!
Good Luck!

Originally Posted by 3gd16
Guanica
Saludos!

idiot-stick 05-04-2008 04:57 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
sweet build ;D

onlyflash944 05-04-2008 06:52 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Originally Posted by losesomethinbra
(found out not to bother without r compounds or slicks!)
no joke. autocross without r comps = you better have a car built for sts

doesn't look like you did so that sucks. get you an extra set of rims and look for some of the miata guys dumping some of their tires. you can find some used ones pretty cheap to get started if you dont' want to buy them new and want to be competetive.

seet build. love the hatches

3gd16 05-12-2008 08:50 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Update
Finally recieved my intercooler pipes, and got a chance to mount them.

First thing i had to do was cut the bumper suport to fit the pipe to the intercooler.
http://www.redpepperracing.com/galle...1/DSC00239.JPG
http://www.redpepperracing.com/galle...1/DSC00240.JPG
http://www.redpepperracing.com/galle...1/DSC00243.JPG

Cold side all done
http://www.redpepperracing.com/galle...1/DSC00245.JPG
http://www.redpepperracing.com/galle...1/DSC00246.JPG
Had to remove the bumper light to fit the bumper
http://www.redpepperracing.com/galle...1/DSC00247.JPG

Had to buy an extra COUPLER 2" to 2 1/2" 90* from turbo to intercooler
http://www.redpepperracing.com/galle...1/DSC00248.JPG
http://www.redpepperracing.com/galle...1/DSC00249.JPG

Can you see the intercooler or the pipes trough the bumper
http://www.redpepperracing.com/galle...1/DSC00250.JPG

Here is my new 3 guage pod made in aluminum
http://www.redpepperracing.com/galle...1/DSC00252.JPG
http://www.redpepperracing.com/galle...C00253_001.JPG
There you see my engine management MEGASQUIRT II V 3

karter74 05-12-2008 09:34 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Looks nice, I wish you good luck with MSII, I know from experience it can be frustrating at times.

3gd16 05-12-2008 11:08 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Originally Posted by karter74
Looks nice, I wish you good luck with MSII, I know from experience it can be frustrating at times.
WHY? What problems have MS given you?

nyc86zc 05-19-2008 12:00 AM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
Nice build. i had two 85's and a few 1st gen crx's. I recently bought back my 87 hf crx. i ripped it apart and now i'm building it back up again. The last owner drove it into the ground. :-\

staticchmbr 05-19-2008 01:43 PM
Re: 84 Civic HB ZC/D16A1-T build 56k
 
nice build...by the way..where did your old hatch with the spoilers go? you can sell that thing for a fortune


All times are GMT -5. The time now is 03:25 PM.
Page 3 of 10
1
2
3
4
5
6
7
8
9
10
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands