is .60.63 too big for a Z6
 

how`s spool time compare to .48/60 in a Z6?..any of you guys tried?..
coz i a actually got a .48/60 on hand but then it looks like i will need a lot more boost then i expected to hit 250 + whp.. (12 + )
will a .60.63 fits in more? . ???

Re:is .60.63 too big for a Z6
 

I'm gonna say go with the 48/60, unless your drag racing the car only. ;)

Re:is .60.63 too big for a Z6
 

yea. through of it but i`ve seen ppl going at like 15 psi to get 250 whp..

Re:is .60.63 too big for a Z6
 

Go for the big one ;D
I'm going T3/T4E 57 trim....AR turbine .48
Just cause I practically got a 42/48 turbo and am going to get a T04E 57 trim housing, wheel, etc... and slap it on ;D

Re:is .60.63 too big for a Z6
 

I got one of those babys in the closet waiting to be installed(60-63) on the crx. waiting for the intercooler to arrive. I dont think its too big. I think it all depends the overall horsepower goal you have.

Re:is .60.63 too big for a Z6
 

I have a T3 60 trim .60/.48 and I think it's a perfect turbo for my Z6. It spools pretty well also(full 9-10 psi a little over 4k). If I turned the boost up to 13-14 psi I could get 250whp out of it easy. Your turbo should work fine so why don't you just turn the boost up more?

Re:is .60.63 too big for a Z6
 

thats great you have a housing a/r your shooting for but without knowing the wheel stage on the turbine side or the wheel trim on the compressor side its like throwing darts blindfolded.

Re:is .60.63 too big for a Z6
 

50 trim / stage 3 wheel. :)

Re:is .60.63 too big for a Z6
 

i have a 60/63 on my Z6...will be doing some test/tuning monday/tuesday...i will let you guys know...

Re:is .60.63 too big for a Z6
 

so let me get this right. you have a to3

with a 50 trim .60 a/r housing on the compressor side and a stage 3 turbine with a .63 a/r. dude that turbine is to big for a z6 1.6 l unless your revving to 8000+ rpm. id go with a .48 turbine housing with that stage 3 turbine wheel.Who speced your turbo ? a stage 1 turbine with a .63 would have worked better.

Re:is .60.63 too big for a Z6
 

i got it from cheapturbo.com
it`s a .48.60 50 trim /stage3 wheel.
so i am all good? 8)

Re:is .60.63 too big for a Z6
 

please clearly and concisely print all the info off the turbo build and spec sheet. Something is amis here.

Re:is .60.63 too big for a Z6
 

Am I one of the only one's with a .63/.60 on my Z6??

I LOVE this turbo. Too many people say it's "too big" NO it aint! It's toooo fast :P

It actually doesn't make boost till LATE in 1st. But once it hits...it hits HARD. ALL the way through. 4-5th gears start to spool around 2500 and hit full boost around 4500-5000. But man, it REALLY puts ya in the seat! :)

I'd say get the big one, but that's just me

Im on 10psi on the hack. The one thing you have to do is make sure the timing isn't retarded too much. It's gonna suck if it is.