5 Bolt Turbo --- bolt under DP too long
1 Attachment(s)
Hey, sorry if the title sounds confusing (this picture will clear it up). Basically it looks like the bolt is too long to squeeze under the DP... it wouldn't hurt anything to just dremel that bolt down a bit, would it? Thanks.
Attachment 33528 |
Re: 5 Bolt Turbo --- bolt under DP too long
Why don't you just loosen all the bolts and tighten that one down and have it pull the downpipe onto the turbo??
|
Re: 5 Bolt Turbo --- bolt under DP too long
Originally Posted by Loserkidwac
Why don't you just loosen all the bolts and tighten that one down and have it pull the downpipe onto the turbo??
|
Re: 5 Bolt Turbo --- bolt under DP too long
I'm not retarted :P
I tried that already... the fact is that no matter how it is put on it's still too long. The picture is just to get a visual of what I was talking about (didn't mean to show all the other bolts tightened down). |
Re: 5 Bolt Turbo --- bolt under DP too long
Then grab a hammer and get to work, or use a dremel or grinder and shorten the bolt a bit.
|
Re: 5 Bolt Turbo --- bolt under DP too long
Originally Posted by jagojon3
Then grab a hammer and get to work, or use a dremel or grinder and shorten the bolt a bit.
|
Re: 5 Bolt Turbo --- bolt under DP too long
just get a shorter bolt
|
Re: 5 Bolt Turbo --- bolt under DP too long
Cut a slot in that hole. Thread the bolt in and slide the dp on. done that on the last two i had. :y
|
All times are GMT -5. The time now is 02:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands