|
Re: 4A-GTE Configuration Questions
The reluctors are held in place on the shaft by tension via a pin, the internals are semi-universal as 75% of Hondas 92-00 have P06 (92-95 D15B7 powered Civic DX) stamped on the reluctors, although the alignment of the flat spot on the shaft + the internal placement of the pickups varies between cars.
Ask Pelegri Didier how he reversed the rotation on a B16, and kept the Honda ECU. This was all covered almost 6 years ago on two different forums but I don't recall as I am a senile bald man. (edit, owned by my porsche loving friend) |
Re: 4A-GTE Configuration Questions
Thx for the info fellas, nice to have a civil and productive thread lol .... i feel dirty
|
Re: 4A-GTE Configuration Questions
This *is* HMT, don't let any of that stop you from telling us to get fucked.
|
Re: 4A-GTE Configuration Questions
Well, unfortunately, Haltech E8 is what I have right now. And I know my question was answered, I just wanted some clarification as far as BOV size. And, Yes I got the point, I know you can push many parts far beyond thier intended power levels with proper tuning. What I meant was there are so many people that try to tell you to follow someone else's project. I'm interesten in writing my own. And I DO take them under consideration for reference.
|
Re: 4A-GTE Configuration Questions
Originally Posted by Conceptz-X
And, Yes I got the point, I know you can push many parts far beyond thier intended power levels with proper tuning.
Originally Posted by Joseph Davis
Conceptz-X, you miss the point entirely. What others have done is the standard for failure. Most intelligent enthusiasts are not well rounded or experienced individuals. What they have done, and how they interpreted the results, is usually completely wrong.
For example, people think stock Honda pistons are weak, add boost and your ring lands are the first to go. They also repeat as a mantra, "it's all in the tune." Well, ---- that, give me a stock part engine that's been properly clearanced for 400+ whp and I can press the laptop buttons to get it there... and from my perspective it's all in the machining. |
Re: 4A-GTE Configuration Questions
I fully understand the machining aspect. and I do agree there, proper machining is key to have an engine perform and live.
|
Re: 4A-GTE Configuration Questions
Originally Posted by Conceptz-X
I fully understand the machining aspect. and I do agree there, proper machining is key to have an engine perform and live.
|
Re: 4A-GTE Configuration Questions
Except the two F-bodies. No offense, worst years for those cars. Hideous.
|
Re: 4A-GTE Configuration Questions
I'll try, MR2 and 72 Mustang are here in GA, the others are sitting at my mom's house in NY waiting for me to drag them down here.
|
Re: 4A-GTE Configuration Questions
Make sure to get some porn-quality high res shots, don't hold out on us with shitty phone cam pics at mad JDM HT angles.
|
| All times are GMT -5. The time now is 01:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands