.4 bar with no intercooler okay?
#5
Re: .4 bar with no intercooler okay?
it helps alot to have a intercooler, cools down and makes messes with the airs density, to make more power and less friction, also can help with detonation i herd, idk thow. helps u cool the air alot thow. i have a 1g dsm smic fs if u want it pm me i want like 35 shipped. help you alot- blake
#6
Re: .4 bar with no intercooler okay?
Originally Posted by progress
Will it be okay for me to run .4 bar (5.6psi) without the use of a intercooler? My tubing will run through the bottom of my bumper if that will help my cooling at all.
#7
Re: .4 bar with no intercooler okay?
You shouldn't have to, but why not get one and push 7 pounds and not worry about detonation. They really aren't hard to instal and they are so effective. But at .4 bar you shouldn't be that bad just be carefull in the heat and run 92.
#8
Re: .4 bar with no intercooler okay?
91octane is the highest that comes in cali. I don't want to run 7psi, because my car wont be tuned, just using a FMU. As for why not just get a cheapo smic, w/o one will make for a cleaner setup, the pipes are just to out of wack on the dsm one, plus the pipes are like 1.75inch on this. I'm going to be running a intercooler later when money in. That's why I'm doing a FMP (front mount pipe) for now.
#10
Re: .4 bar with no intercooler okay?
If you can find a way to route the piping in such a way that it will be exposed to cool air (your FMP you're calling it), then why can't you find a way to cut out a section in that piping and squeeze in a small intercooler? DSM's aren't the only cars that came with intercoolers. You can dig through ebay and find something with endtanks you can use. Here's a couple examples after not even 5 minutes of searching.
http://cgi.ebay.com/ebaymotors/ws/eB...984916764&rd=1
http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW
But if you insist on not running an intercooler, then I agree with the above guy. Don't even bother running a "FMP",, just go for the shortest route possible.
http://cgi.ebay.com/ebaymotors/ws/eB...984916764&rd=1
http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW
But if you insist on not running an intercooler, then I agree with the above guy. Don't even bother running a "FMP",, just go for the shortest route possible.