31x12 intercooler on a crx possible?
I wtb a 31x12x3 intercooler for my rex, but i don't know if it's possible to make it fit with the stock bumper, because i made some measurements to my car and didn't seems to be possible, the IC seems to be to tall for it.
A pic will be appreciated |
Re: 31x12 intercooler on a crx possible?
y do u need that IC?
whats your set up |
Re: 31x12 intercooler on a crx possible?
Originally Posted by Zeniceguycrx
y do u need that IC?
whats your set up |
Re: 31x12 intercooler on a crx possible?
Originally Posted by hard2obtain
No, didn't need it, but are very cheap on ebay those 31x12x3 intercoolers, as low as $130 shipped, and for shure that IG gives a very agressive looking for a rex.
|
Re: 31x12 intercooler on a crx possible?
A sawzall is all you need and anything will fit.
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by 88dx
I got the 31x3x9 for $116 shipped its plenty big and it should fit fine on my crx :6
|
Re: 31x12 intercooler on a crx possible?
I got my 30X12X3 to fit no problem, I had to cut probably close to 1/2 of the bumper support right out though
a 6" can fit without any hacking though, and I doubt youll be making enough power to overflow the efficiency of the JRC 6" anyways, so Id just go with that, will fill up the grill nicely |
Re: 31x12 intercooler on a crx possible?
Originally Posted by W O T
I got my 30X12X3 to fit no problem, I had to cut probably close to 1/2 of the bumper support right out though
a 6" can fit without any hacking though, and I doubt youll be making enough power to overflow the efficiency of the JRC 6" anyways, so Id just go with that, will fill up the grill nicely |
Re: 31x12 intercooler on a crx possible?
Originally Posted by hard2obtain
Where did you get that IC, i want one like yours!
http://cgi.ebay.com/ebaymotors/Turbo...mZ290066075319 |
Re: 31x12 intercooler on a crx possible?
PM Donald hes got one for $80 shipped
|
Re: 31x12 intercooler on a crx possible?
i got my 30x12x3 hks race fmic for 75 bucks, on my accord and i was told it woulnd fit so ftw and mount that bitch up
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by stillnoturbo
A sawzall is all you need and anything will fit.
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by 88dx
Off ebay from this seller. I dont see a listing for the 9" one right now
http://cgi.ebay.com/ebaymotors/Turbo...mZ290066075319 |
Re: 31x12 intercooler on a crx possible?
Originally Posted by 95_civic_lx
PM Donald hes got one for $80 shipped
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by hard2obtain
Not same as yours, that one are only 28". One like yours could be cool
|
Re: 31x12 intercooler on a crx possible?
I found some pics but i dont like to cut the bumper....
http://www.superhonda.com/photopost/...657421crx6.jpg http://www.superhonda.com/photopost/...73DSC01689.JPG http://www.superhonda.com/photopost/...TNkZmQzMXk1NDE |
Re: 31x12 intercooler on a crx possible?
Here's mine. Before you say I cut to much mine is an hf and the bumper is a pice of notthing. Here you go.
http://www.pix8.net/pro/pic.php?u=1679m3ty6&i=937515 |
Re: 31x12 intercooler on a crx possible?
1 Attachment(s)
if the pic shows up they fit....kinda....just a little cutting and some custom charge pipes
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by Hellbert
if the pic shows up they fit....kinda....just a little cutting and some custom charge pipes
|
Re: 31x12 intercooler on a crx possible?
3 Attachment(s)
well it's obviously not a crx, but this is a JRC 31x3x8 in my 5th gen civic, and you can see how much material I had to remove of the bumper support to make it all work sooo.....
Attachment 30201 Attachment 30202 Attachment 30203 |
Re: 31x12 intercooler on a crx possible?
Originally Posted by hard2obtain
Jajajaja, so cool, but i think you can't lower your car with that piping
in that pic i have 205/50/15s right to the edge of the fender well. the intercooler doesnt hang any lower than the oil pan and my DP is lower than my pan by like half an inch or so. i cut all but the top flap part off my bumper support. you cant see about 5 inches of the intercooler haha |
Re: 31x12 intercooler on a crx possible?
|
Re: 31x12 intercooler on a crx possible?
Here's Tall Kyle's car with a huge FMIC. I think he said on HT it was a 32x12x3.
http://img460.imageshack.us/img460/5484/img1233hk8.jpg And then under the stock bumper: http://img146.imageshack.us/img146/2305/img1267oy7.jpg And then with a homemade front lip which made it looks perfect: http://img137.imageshack.us/img137/4373/img1289ak9.jpg |
Re: 31x12 intercooler on a crx possible?
Originally Posted by b00sted
Here's Tall Kyle's car with a huge FMIC. I think he said on HT it was a 32x12x3.
http://img460.imageshack.us/img460/5484/img1233hk8.jpg And then under the stock bumper: http://img146.imageshack.us/img146/2305/img1267oy7.jpg And then with a homemade front lip which made it looks perfect: http://img137.imageshack.us/img137/4373/img1289ak9.jpg Isn't that a piece of flower garden edging? If so that could possibly be the most HMT thing I've seen. |
Re: 31x12 intercooler on a crx possible?
That is def a HomeBoy Racing front lip :y Nice work buddy that is tits
|
Re: 31x12 intercooler on a crx possible?
2 Attachment(s)
|
Re: 31x12 intercooler on a crx possible?
its 33x12x3
|
Re: 31x12 intercooler on a crx possible?
How tilted is it?
|
Re: 31x12 intercooler on a crx possible?
1 Attachment(s)
|
Re: 31x12 intercooler on a crx possible?
anything will fit with the right cut off wheel and sawzall blade
|
Re: 31x12 intercooler on a crx possible?
1 Attachment(s)
Here's a pic of my crx with a 33x11x3, 24 inch core. There's about and inch or so above the intercooler so I would imagine that a 12 inch tall intercooler would be do able.
Attachment 30154 |
Re: 31x12 intercooler on a crx possible?
lol, that homedepot lip is awsome
|
Re: 31x12 intercooler on a crx possible?
Originally Posted by laports_best_crx
ya it works.....
http://i143.photobucket.com/albums/r...1/100_0490.jpg http://i143.photobucket.com/albums/r...rcoolermmm.jpg |
Re: 31x12 intercooler on a crx possible?
something that tall doesn't flow very well, well idk what's the flow rating on that intercooler? the 31x3x9 one
|
Re: 31x12 intercooler on a crx possible?
mines 12 and it seems to flow pretty well
|
Re: 31x12 intercooler on a crx possible?
1 Attachment(s)
Originally Posted by crxvtec91
Here's mine. Before you say I cut to much mine is an hf and the bumper is a pice of notthing. Here you go.
http://www.pix8.net/pro/pic.php?u=1679m3ty6&i=937515 |
Re: 31x12 intercooler on a crx possible?
http://img108.imageshack.us/img108/8296/1001639wm1.jpg
http://img512.imageshack.us/img512/4174/1001650wp7.jpg 35x4x2.5 from treadstone.perfect, I had to cut 75% of the bumber support |
Re: 31x12 intercooler on a crx possible?
The crx is obviously one of the worst cars as far as crash ratings, but I guess I'd be more worried about weakening the front end. Does the removat of all this material make a large difference in rigidity? I realize the front crossmember is down below, but there's minimal material tying the top portion together. (hood latch crossbar)
Anyone notice unwanted flexing when the bumper support was removed? -josh- |
Re: 31x12 intercooler on a crx possible?
European hondas don't have bumber supports like US hondas,
and they drive faster here so the support dont do much. look at it like this you intercooler is your new support, plus it covers more area than the original support |
Re: 31x12 intercooler on a crx possible?
ya im pretty sure that the bumper support is one of those dumbass usdm things that slows are ------- hondas down.... i havent noticed any difference and if your worried about it get a strut bar for the front, that would help stiffen it up. but the crossmember is still there on the crx's
|
All times are GMT -5. The time now is 04:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands