HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   2G DSM BOV (https://www.homemadeturbo.com/forced-induction-7/2g-dsm-bov-33058/)

topspeed 01-10-2005 10:09 PM

2G DSM BOV
 
who has used this before, are they loud, quiet or just sound the same as the 1G bov? how much boost can they hold?

2stockrocketz 01-10-2005 10:13 PM

Re:2G DSM BOV
 
i using one right now, you can hear it but its not super loud. and i dont know what the 1st g sounds like, oh and i think the 2nd gen can hold 12psi

jspec89 01-10-2005 10:47 PM

Re:2G DSM BOV
 
the 1g can hold more boost especially if u can find a pre-crushed one. lots of dsm tuners swap the 2g for a 1g. they arent that loud like say the XS RFL but u can hear it. the 1g is good enough if your on a budget like me.

topspeed 01-10-2005 11:48 PM

Re:2G DSM BOV
 
thanks guys, i'm buying a 2G bov for $40 plus the pipe so i guess thats not too much for an 'ok' BOV. Anyone else have any comparisions between the 2G and the 1G BOV? i'm not running anything over 10psi anyways so leaking shouldn't be a big problem.

djfob 01-11-2005 01:46 AM

Re:2G DSM BOV
 
For 40 bucks I'd rather get the better 1G bov instead. Also it doesn't need to be crushed for the boost levels I'm assuming you are going to be running. I'd never pay 40 for a cheap plastic bov.

HMT-Admin 01-11-2005 04:16 AM

Re:2G DSM BOV
 
agreed, 40 is to much for the 2g dsm bov, 40 for a 1g is still kinda high but worth it.

2g's are plastic and will leak at higher boost levels.


D16Y7-T 01-11-2005 07:04 AM

Re:2G DSM BOV
 
I agree, because of the design of the 2G (plastic) it leaks at higher boost levels, the 1G is probably one of the best style and make of a BOV, when crushed it can hold 20PSI without breaking a sweat. And its sounds decent too.

topspeed 01-11-2005 10:48 PM

Re:2G DSM BOV
 
ya i think i'll try to look for a 1G if i can't find one for a good price then i guess i'll use the 2G it shouldn't leak at 10psi right.

djfob 01-12-2005 12:44 AM

Re:2G DSM BOV
 
http://cgi.ebay.com/ebaymotors/ws/eB...category=33742

scarecrowX 01-12-2005 01:25 AM

Re:2G DSM BOV
 
the valve being plastic has NOTHING to do with why it leaks.

the fact that the valve spool (shaft) is also used as the pressure tube to the lower port of the diaphragm is why it leaks. take some JB weld and plug the hole in the silver shaft in the bottom part of the valve and it will hold several more PSI since the lower port of the diaphragm is not seeing boost. it just won't react as quickly.

your average 2g bov shouldn't run you more than $10 (you said you're getting the pipe though too, so $40 is a bit better iwth that factored in). it's moderately loud. i could hear it pretty well on my talon even with it recirculated. sounds like someone exhaling really quickly.


All times are GMT -5. The time now is 06:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands