good build

 

will jbweld be okay on the downpipe,,,? i have a leak and my bitch mom doesnt want me welding it and when i tried, i acidently caught some o2 sensor wire on fire, lol

 

You never cease to amaze me with "the ghettoness".... No, jb weld does not do well with those temps.. But you can give it a shot. And why doesn't your ma want you welding?

 

No. The temps are too high.

 

----... bc she thinks im going to make the car explode, i REALLY dont want to take it all off, bc i would have to take practically the whole exhaust off the car.

 

look at the name of the website bro, lol im 17 btw, and dont have the moneys....

i jb welded that ******* intercooler, but update on that, it was about ouside temp to the touch when pump was installed, but before that, it was same as engine bay, it worked better than i expected, no lie.
no temp readings tho..

 

i think my goddamn piece of ---- ------- chinese turbo is blows... here is a vid i took YouTube - is my turbo blown

i had bad smoke on hard throttle the last day i drove it, and then i noticed the oil line leaking from the top i fixed that, and now it sounds like this, it DOES blow air at idle with no charge pipes.... another thing, if it is, could i get a garret rebuild kit to make this ****** last..?

its a t04e t3/t4 .50 trim turbo im pretty sure.....

 

no shaft play at all either..

 

Do you have a restrictor on the oil inlet? Those CDM turbos will blow a seal if you push 60 psi through it unrestricted. What were you trying to show in that video?

 

yes there is an oil restrictor, there is a whining sound at ~3k and up