18 + psi, no no no no!!!!
I have a new problem, looks like my 8psi internal wastegate doesn't works correctly. When i hit full boost in 3rd gear it goes to 18 + psi, like if the wastegate doesn't open.
I check the wastegate arm to verify it moves, and seems to be ok. Need to change the wastegate or what i need to do? :3 |
Re: 18 + psi, no no no no!!!!
you sure the vac line didnt pop off?
|
Re: 18 + psi, no no no no!!!!
either that or the line is getting weak from heat causing the line to expand giving your WG a false psi reading and making it open waaaaaayyy to late. It was happening to me. I had to re-route my WG line behind the VC...
|
Re: 18 + psi, no no no no!!!!
Originally Posted by JoshMO
either that or the line is getting weak from heat causing the line to expand giving your WG a false psi reading and making it open waaaaaayyy to late. It was happening to me. I had to re-route my WG line behind the VC...
Let me change it, and see what happens. Thanks |
Re: 18 + psi, no no no no!!!!
high pressure fuel line is nice to use for vac line that is under high heat and pressure ;)
|
Re: 18 + psi, no no no no!!!!
put a carb spring on it 8)
|
Re: 18 + psi, no no no no!!!!
Internal wastegate changed, same problem, vacuum line changed, same problem.
Solution: Need an external wastegate |
Re: 18 + psi, no no no no!!!!
Originally Posted by hard2obtain
Internal wastegate changed, same problem, vacuum line changed, same problem.
Solution: build motor for 18# of boost |
Re: 18 + psi, no no no no!!!!
Originally Posted by Eville140
Fixed it for you
|
Re: 18 + psi, no no no no!!!!
Originally Posted by hard2obtain
I check the wastegate arm to verify it moves, and seems to be ok.
You might have a leaky diphram or bad vacuume source. make sure you dont have a check valve or something from where your getting it from. |
All times are GMT -5. The time now is 02:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands