14b turbo oil feed presure?
ok well i have about 80 psi oil presure stock and a 14b turbo
i was told that because the 14b turbo has little holes in the oil inlet that i would be fine running 80psi to it im not smoking or leaking oil at the moment can i stay with 80 psi or do i need to put in a ristrictor valve? |
Re: 14b turbo oil feed presure?
You should be just fine. What engine do you have?
|
Re: 14b turbo oil feed presure?
80psi to any turbo is bad. is 80 at idle or wot? you should only be pusing 10-20 psi to your turbo.
|
Re: 14b turbo oil feed presure?
Originally Posted by 4g63t_EGMonster
" you should only be pusing 10-20 psi to your turbo."
|
Re: 14b turbo oil feed presure?
no when its warm it drops down to like 20-30 psi idel but when i rev it goes to like 80
im running a d15b7 stock internals |
Re: 14b turbo oil feed presure?
the 14b's oil fitting's banjo bolt is a restrictor, you will be fine ;)
|
Re: 14b turbo oil feed presure?
Originally Posted by fubar
Is this at idle or WOT????
I didnt think the 14b's had a banjo bolt but if it does you should be a ok |
Re: 14b turbo oil feed presure?
Originally Posted by 4g63t_EGMonster
this is at idle.
I didnt think the 14b's had a banjo bolt but if it does you should be a ok |
Re: 14b turbo oil feed presure?
umm im not using the original oil feed lines
my budy helped me we got some crimped with a 90 bend in the fitting i have pics but it wont let me post them for some reson plz give me your email or check www.angelfire.com/crazy/turbo6969 |
All times are GMT -5. The time now is 09:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands