mahalas

ok well i have about 80 psi oil presure stock and a 14b turbo
i was told that because the 14b turbo has little holes in the oil inlet that i would be fine running 80psi to it
im not smoking or leaking oil at the moment
can i stay with 80 psi or do i need to put in a ristrictor valve?

Random Hero

You should be just fine. What engine do you have?

4g63t_EGMonster

80psi to any turbo is bad. is 80 at idle or wot? you should only be pusing 10-20 psi to your turbo.

fubar

Is this at idle or WOT?

mahalas

no when its warm it drops down to like 20-30 psi idel but when i rev it goes to like 80
im running a d15b7 stock internals

con

the 14b's oil fitting's banjo bolt is a restrictor, you will be fine

4g63t_EGMonster

this is at idle.

I didnt think the 14b's had a banjo bolt but if it does you should be a ok

CRXDrew

yep, stock lines did. Do a search for my DIY $3 oil restrictor on here or Honda-tech. Without it my turbo would smoke.

mahalas

umm im not using the original oil feed lines
my budy helped me we got some crimped with a 90 bend in the fitting
i have pics but it wont let me post them for some reson
plz give me your email or check www.angelfire.com/crazy/turbo6969