is 1400 degrees gonna melt pistons?
#11
Re: is 1400 degrees gonna melt pistons?
You guys scare me.
1450 deg F at WOT should be your target max EGT. These are not factory forced induction rides, with beefier cooling systems, forged pistons, valves/valvetrain, etc, designed for all the excess thermal load. Factory FI cars can deal with higher EGTs because they are designed to get rid of all that extra heat.
1450 deg F at WOT should be your target max EGT. These are not factory forced induction rides, with beefier cooling systems, forged pistons, valves/valvetrain, etc, designed for all the excess thermal load. Factory FI cars can deal with higher EGTs because they are designed to get rid of all that extra heat.
#12
Re: is 1400 degrees gonna melt pistons?
Originally Posted by Joseph Davis
You guys scare me.
1450 deg F at WOT should be your target max EGT. These are not factory forced induction rides, with beefier cooling systems, forged pistons, valves/valvetrain, etc, designed for all the excess thermal load. Factory FI cars can deal with higher EGTs because they are designed to get rid of all that extra heat.
1450 deg F at WOT should be your target max EGT. These are not factory forced induction rides, with beefier cooling systems, forged pistons, valves/valvetrain, etc, designed for all the excess thermal load. Factory FI cars can deal with higher EGTs because they are designed to get rid of all that extra heat.
None of my turbo dodges have forged pistons. And a few share the same cooling system as my N/A cars. It's all about the tune. The only differences in my turbo cars and my N/A cars is the composition of the exhaust valves and the Static compression of the pistons. My Turbo 2.5L has a static compression ratio of 7.9:1, while the N/A 2.5L has the 9:1 ratio. My 3.0L is even 8.85:1 CR.
The turbo cars exhaust valves are made of stainless steel to handle the excessive exhaust temps before the turbo. All else is equal between the two.
Thread
Thread Starter
Forum
Replies
Last Post
McBoost
Forced Induction
14
08-29-2006 11:23 PM
Danabis
Forced Induction
5
06-06-2005 10:31 PM
robs99si
Forced Induction
8
05-25-2004 05:35 PM