Where to get cheapest pipe fittings and mandrel bends...
I know this comes up a lot, but ---- changes as time goes on.
I'm going to be buying some 1.25 and 1.5" stainless 90's (pipe) and some 2" tube and mandrel bends. Anybody think they know the best prices? and no, McMaster isn't cheapest. |
Re: Where to get cheapest pipe fittings and mandrel bends...
I'm also gonna need some t3 flanges, and probably some other flanges that will have to be laser cut. I have a cad drawing of them alread.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
|
Re: Where to get cheapest pipe fittings and mandrel bends...
/\/\ Good prices but I thought there shipping was overpriced.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by G2turbo_terror
/\/\ Good prices but I thought there shipping was overpriced.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
pm me., i prob have one of the best hookups possible price wise on schedule bends.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
i can get 304 schedule 10 90's for $7/each plus shipping.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by weiRtech
i can get 304 schedule 10 90's for $7/each plus shipping.
I'd post up where, but I dunno if he's giving me some favor, or if it's his regular price. |
Re: Where to get cheapest pipe fittings and mandrel bends...
$4.25 here.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
post up bitches..........don't hold out
|
Re: Where to get cheapest pipe fittings and mandrel bends...
come on post it up man, where do yall get these deals at. i'm bout to pay mcmaster 15 bucks for one sch 40 2 in 90 bend and 50 bucks for some 1/4 in by 6 in by 36 in sheet metal to cut out some flanges :l
|
Re: Where to get cheapest pipe fittings and mandrel bends...
For elbows, call
Ace Stainless Richard 800-888-8769 I don't think they do any flanges at all. They do carry mandrel bent tube for downpipes and stuff. I think the price on a 3" was about $17.50. |
Re: Where to get cheapest pipe fittings and mandrel bends...
Thanks man, good stuff ;D
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by Engloid
For elbows, call
Ace Stainless Richard 800-888-8769 I don't think they do any flanges at all. They do carry mandrel bent tube for downpipes and stuff. I think the price on a 3" was about $17.50. as for flanges and what not i vote on Aaron Wier; he's fast and efficient and costs about the same or less than the rest of the guys. he also doesn't bullshit around |
Re: Where to get cheapest pipe fittings and mandrel bends...
McMasters is the ----!!! I ordered 15 90's and six foot of pipe on wed. at 3pm, and got them at 11am on thursday.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by G2turbo_terror
/\/\ Good prices but I thought there shipping was overpriced.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
ace is no tthe cheapest alternative.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by hotrex
ace is no tthe cheapest alternative.
Post up where you can get it cheaper... |
Re: Where to get cheapest pipe fittings and mandrel bends...
i fucked up
|
Re: Where to get cheapest pipe fittings and mandrel bends...
I've now found two threads specifically targetting me as overpricing shipping so let me repost what I already posted on the other thread:
Our shipping prices are pulled directly through the UPS API system, they are based on weight and we add $2.00 for a box. NOBODY is ever overcharged for shipping from us. NOW - I realise that I can get cheaper rates through DHL and FEDEX -- but my customers need their product NOW, and they get it NOW. No bullshit with UPS - ever. We ship on average of 30+ boxes a day - I have no time to play *check the tracking # and pray*. Fedex loses every third package I've ever sent with them and their claims department is a joke - they lost a $2700 turbo system of ours 2 months ago -- and dishonored the claim. I have no experience with DHL to say yay or nay with - but why even bother. UPS gets it there and that's all I care about. It's not worth the risk to save $5.
Originally Posted by Alex in Houston
Aint that the truth..................He overcharges for shipping so much, you'd payless paying more for parts somewhere else............Go figure.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by Engloid
Until you prove otherwise, they are. ::)
Post up where you can get it cheaper... i honestly dont even want to tell these dick lickers. maybe ill pm you. |
Re: Where to get cheapest pipe fittings and mandrel bends...
i don't think engloid was tryin to be an ass about it, but to the rest of us they would be the cheapest until proven otherwise. he was simply stating in a fact and throwing in a dumb ass smiley face thing that i'm sure about 9000 of your current 10268 posts have in them ::)
i aint trying to be an ass either, just letting ya know |
Re: Where to get cheapest pipe fittings and mandrel bends...
I got a better deal on sch pipe finally!
sch 40 90s my price are $4.16 each sch 40 t's are $8.25 each on tubing I got a deal with vertex industries now, I get everything 10% off (I do about 2-4k $ per month thought) |
Re: Where to get cheapest pipe fittings and mandrel bends...
No, I wasn't trying to be a smartass about the prices....just kidding around with you. I do PM me some info if it's good ----.
Originally Posted by BmCRace.com
I got a better deal on sch pipe finally!
sch 40 90s my price are $4.16 each sch 40 t's are $8.25 each on tubing I got a deal with vertex industries now, I get everything 10% off (I do about 2-4k $ per month thought) |
Re: Where to get cheapest pipe fittings and mandrel bends...
racing solutions got me everything I needed for around 60 shipped. Got it in 2 days.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by Engloid
No, I wasn't trying to be a smartass about the prices....just kidding around with you. I do PM me some info if it's good ----.
So doing the math, it would be about $4.62 for the rest of us...for the 90's. Thanks |
Re: Where to get cheapest pipe fittings and mandrel bends...
damn!! I wish i wouldve known this before. I just bought 70, 1.5" sch10 ss 90's for $5.20 each.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by 3s-gte SW20
damn!! I wish i wouldve known this before. I just bought 70, 1.5" sch10 ss 90's for $5.20 each.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by BmCRace.com
I got a better deal on sch pipe finally!
sch 40 90s my price are $4.16 each sch 40 t's are $8.25 each on tubing I got a deal with vertex industries now, I get everything 10% off (I do about 2-4k $ per month thought) |
Re: Where to get cheapest pipe fittings and mandrel bends...
^^ i dont think james sells that stuff. I also dont think he would sell them to you at those prices ;)
|
Re: Where to get cheapest pipe fittings and mandrel bends...
aww, dammit. yeah I was kinda wondering
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by fourthgenhatch
I will be getting my stuff from you
-James |
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by LSD Motorsports
However since there is a demand for lower prices, im going to drop them to $4.25 ea. For someone who purchases in qty, i can drop the price even more. So just pm me with your needs.
Thanks |
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by Alex in Houston
You'll be getting my business, that's for sure :D
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Originally Posted by LSD Motorsports
just let me know, i keep about 200 of the elbows in stock.
|
Re: Where to get cheapest pipe fittings and mandrel bends...
Do you also carry T's?
|
Re: Where to get cheapest pipe fittings and mandrel bends...
how many bends does it usually take to make a ram horn, or equal length turbo mani??
|
Re: Where to get cheapest pipe fittings and mandrel bends...
just think about it and look at a couple pics :1
if youre asking this, i hope your not planning on making on yourself |
Re: Where to get cheapest pipe fittings and mandrel bends...
elevenity-billion
|
Re: Where to get cheapest pipe fittings and mandrel bends...
lol just curious on how much money you guys usually spend on materials..i have no welding skills
|
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands