Where to buy WELD EL's
03-19-2008, 04:06 AM
#11
3.0 BAR
Join Date: May 2005
Posts: 1,811
Re: Where to buy WELD EL's
$/Piece
for real you're obviously not the sharpest knife in the drawer are you
It's going to be a set of long-tube headers + 2.5" y-pipe for a v6. Probably wind up with >$400 in it. Including a new tin of solarflux, argon refils, free flange cutting (myself on the CNC plasma, drilled holes), new bi-metal bandsaw blade :\ etc.
Saving money on filler like mad tho on thsoe elbows. What you can't tell is the OD of the elbows is 1.900", but the tube OD is 1.750" (it's not schedule-10). So insted doing some gapped one pass (or two pass if you're gay lol jk) groove welds. It's really doing some tiny fillet welds. I wouldn't recommend it for FI, but bah... NA is **** easy. Im not even cleaning the solarflux out of the welds.
I will say on solarflux tho... Engloid hates solarflux. Which means it sucks.
Personally i don't give a flying ---- if a piece goes through a turbine. I've had a good dozen JB welded intake ports chip off into intake valves and been chewed up & spit out. Not a mark even on the aluminum intake or exhaust valve seats, or piston face... And valve/seat combos are a hell of alot more sensitive than turbine blades. Saves me lots of time and money backpurging. $35 can lasted me two years. I figure most of the guys doing this stuff for a HOBBY can go through four 80-150ft^2 tanks a year. 2 tanks of that for backpurging if you backpurge everything pipe related. So call a 150 tank on average $35 for a hobby guy, that's $70-140 every two years (how long my 1lb can lasted) compaired to $35 + the cost of alittle alcohol to mix with. A little goes along way. Doesn't take a capfull of powder to do an i4 turbo manifold if you could weld it before it dries out.
for real you're obviously not the sharpest knife in the drawer are you
It's going to be a set of long-tube headers + 2.5" y-pipe for a v6. Probably wind up with >$400 in it. Including a new tin of solarflux, argon refils, free flange cutting (myself on the CNC plasma, drilled holes), new bi-metal bandsaw blade :\ etc.
Saving money on filler like mad tho on thsoe elbows. What you can't tell is the OD of the elbows is 1.900", but the tube OD is 1.750" (it's not schedule-10). So insted doing some gapped one pass (or two pass if you're gay lol jk) groove welds. It's really doing some tiny fillet welds. I wouldn't recommend it for FI, but bah... NA is **** easy. Im not even cleaning the solarflux out of the welds.
I will say on solarflux tho... Engloid hates solarflux. Which means it sucks.
Personally i don't give a flying ---- if a piece goes through a turbine. I've had a good dozen JB welded intake ports chip off into intake valves and been chewed up & spit out. Not a mark even on the aluminum intake or exhaust valve seats, or piston face... And valve/seat combos are a hell of alot more sensitive than turbine blades. Saves me lots of time and money backpurging. $35 can lasted me two years. I figure most of the guys doing this stuff for a HOBBY can go through four 80-150ft^2 tanks a year. 2 tanks of that for backpurging if you backpurge everything pipe related. So call a 150 tank on average $35 for a hobby guy, that's $70-140 every two years (how long my 1lb can lasted) compaired to $35 + the cost of alittle alcohol to mix with. A little goes along way. Doesn't take a capfull of powder to do an i4 turbo manifold if you could weld it before it dries out.
03-19-2008, 10:24 AM
#12
3.0 BAR
Join Date: Oct 2003
Location: Your mom's panties
Posts: 3,696
Re: Where to buy WELD EL's
Yeah ---- me for reading "i got a big tube from ace for $4.90/p about two months ago" and then seeing a big cardboard tube full of elbows and ----. You could be a cool guy if you weren't such a ------- tool. In all fairness though it sounds like a nice project... what kind of v6?
Thread
Thread Starter
Forum
Replies
Last Post
civicboy88
Turbo Parts For Sale
15
11-21-2005 12:46 PM
