Welding onto turbo exhaust housing.
#1
Welding onto turbo exhaust housing.
Hey will i cause any problems by tacking (MIG) 2 nuts onto the scroll of my exhaust housing? Iam making up a heat shield and bolting it straight onto the housing seems the easiest as im pressed for room. It will be under ---- all load. It seems my engine bay got hot enough to set my firewall carpet a light lol. cheers
#3
Re: Welding onto turbo exhaust housing.
----, he needs to get a fire blanket too and put that under the carpet on the interior.
Temp solution - raise up the rear of the hood a little with some washers/nuts to let some of the hot air out and bring the temps down a little.
Temp solution - raise up the rear of the hood a little with some washers/nuts to let some of the hot air out and bring the temps down a little.
#6
Re: Welding onto turbo exhaust housing.
Well thanks for the suggestions. The vehicle is a 2wd L300 mitsubishi van so the bonnet is my seat so i cant go lifting that ----. . I dont want to use a turbo blanket if i dont have to.