HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Fabrication (https://www.homemadeturbo.com/fabrication-14/)
-   -   Water Lines?!?!?WTf?!?11 (https://www.homemadeturbo.com/fabrication-14/water-lines-wtf-11-a-75738/)

jimboburgess 03-27-2007 12:09 PM

Water Lines?!?!?WTf?!?11
 
I am missing water lines to my t3 turbo off a 198-something nissan 300zx it's the one with the .63ar on the intake. i only have one bolt but am missing the other and both banjo fittings
I looked around a little bit online for replacements and could only find banjofittings for turbos on Rx-7s.

Is it possible to make these or could i get them from somewhere?
does anyone have some lying around?
I don't want to leave out water cooling.

HMTdmc 03-27-2007 12:47 PM

Re: Water Lines?!?!?WTf?!?11
 
Nissan dealship buddy. Probably will cast about $10 apiece though.

jimboburgess 03-27-2007 01:54 PM

Re: Water Lines?!?!?WTf?!?11
 
$10 is nothing, i bet more the rk7 fittngs cost $40

scottsi 03-27-2007 05:23 PM

Re: Water Lines?!?!?WTf?!?11
 
you dont need water lines, turbo time your ----

jimboburgess 03-27-2007 07:28 PM

Re: Water Lines?!?!?WTf?!?11
 
i could do that. . .
i went to the dealership, the guy there said that if they could get them they cost $86.94


junk yard it will be, i could turbow time it. Or i could go to the junkyard and start digging

TunerToys 03-27-2007 09:16 PM

Re: Water Lines?!?!?WTf?!?11
 
Measure your remaining banjo bolt. If its 14mm, we got you covered, so email us at sales@tunertoys.com.

Craig

jimboburgess 03-28-2007 11:40 AM

Re: Water Lines?!?!?WTf?!?11
 
I looked on your website it looks like what you have is for the 14b and t25, i know that what i have is bigger than the water lines on a 14b since that is what i had before. If i can just get the banjo fittings i could make bolts easily enough to use them if i also filled in the hole on the turbo and retapped it. the flow would be what nissan optimized it to be but it would be better than nothing and i bet would still be sufficient to properly cool the turbo.

Then again there is that idea of going to a junkyard and diggin around , i just have to get around to it since the closest junkyard to me is 40-60 minutes away.

cberman 03-28-2007 06:23 PM

Re: Water Lines?!?!?WTf?!?11
 
http://www.blaastperformance.com/ind...p=t3waterbanjo

That appears to be right doesn't it? Claims to fit a nissan t3...might wanna email him first tho to make sure

jimboburgess 03-28-2007 07:56 PM

Re: Water Lines?!?!?WTf?!?11
 
exactly what i need, awesome thanks alot man

Engloid 04-01-2007 10:37 AM

Re: Water Lines?!?!?WTf?!?11
 
If that falls through, check at z31.com for one on the forum or classifieds.


All times are GMT -5. The time now is 04:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands