jimboburgess

I am missing water lines to my t3 turbo off a 198-something nissan 300zx it's the one with the .63ar on the intake. i only have one bolt but am missing the other and both banjo fittings
I looked around a little bit online for replacements and could only find banjofittings for turbos on Rx-7s.

Is it possible to make these or could i get them from somewhere?
does anyone have some lying around?
I don't want to leave out water cooling.

jimboburgess

$10 is nothing, i bet more the rk7 fittngs cost $40

scottsi

you dont need water lines, turbo time your ----

jimboburgess

i could do that. . .
i went to the dealership, the guy there said that if they could get them they cost $86.94


junk yard it will be, i could turbow time it. Or i could go to the junkyard and start digging

TunerToys

Measure your remaining banjo bolt. If its 14mm, we got you covered, so email us at sales@tunertoys.com.

Craig

jimboburgess

I looked on your website it looks like what you have is for the 14b and t25, i know that what i have is bigger than the water lines on a 14b since that is what i had before. If i can just get the banjo fittings i could make bolts easily enough to use them if i also filled in the hole on the turbo and retapped it. the flow would be what nissan optimized it to be but it would be better than nothing and i bet would still be sufficient to properly cool the turbo.

Then again there is that idea of going to a junkyard and diggin around , i just have to get around to it since the closest junkyard to me is 40-60 minutes away.

cberman

http://www.blaastperformance.com/ind...p=t3waterbanjo

That appears to be right doesn't it? Claims to fit a nissan t3...might wanna email him first tho to make sure

jimboburgess

exactly what i need, awesome thanks alot man

Engloid

If that falls through, check at z31.com for one on the forum or classifieds.