Upstate Parts CNC Cutting
12-13-2008, 11:45 AM
#21
0.5 BAR
Thread Starter
Join Date: Jun 2007
Posts: 185
Re: Upstate Parts CNC Cutting
Originally Posted by silentdaredevil2
why do you have your hands in there in the first place? 
12-13-2008, 04:29 PM
#22
0.0 BAR
Join Date: May 2005
Posts: 0
Re: Upstate Parts CNC Cutting
Originally Posted by zero5672
The parts that was getting cut has small oblong type cut outs, and the blanks that are cut out will pop out on top of the material and if you don't move them the tip will hit them. Messing up the tip and the project your cutting. Fail
You fail.
Whenever I get ---- water jet cut they always leave a small section uncut, like maybe 25 thou.
12-14-2008, 07:17 AM
#25
3.0 BAR
Join Date: May 2005
Posts: 1,811
Re: Upstate Parts CNC Cutting
What kind of pump is it?
We had a Multi-cam 6000 (10'*17') with the 50hp pump on it at school. It was pimp. Cut some aluminum and diamond plate with it. It was hot. Even did some wood & some kind of acrylic too! Sometimes the hopper would jam up with abrasive tho - suckage.
2 1/2" Toyota exhaust flange, eating that ---- up.
We had a Multi-cam 6000 (10'*17') with the 50hp pump on it at school. It was pimp. Cut some aluminum and diamond plate with it. It was hot. Even did some wood & some kind of acrylic too! Sometimes the hopper would jam up with abrasive tho - suckage.
2 1/2" Toyota exhaust flange, eating that ---- up.
Thread
Thread Starter
Forum
Replies
Last Post
jddurgin
Fabrication
0
05-18-2011 01:03 PM
jarebear667
Fabrication
36
06-08-2007 05:33 AM
