Traction Bars, By the End of the Week *With EG and Current Picks*
#1
Traction Bars, By the End of the Week *With EG and Current Picks*
Well guys, I finally got aroud to tearing my car down to fab up a prototype to make a better jig from.
Here is a pic of the design. This is not the EXACT Design, But very Close. The Rad will sit flus with the bottom of the bar, and a Stock rests on top.
Will work with a Half Rad.
I will be contacting the NUMEROUS amount of people who have been PMing me for these.
I also hae a new 92-00 Design I made up a few weeks ago. I currently don't have pics but I will be posting them up tonight.
Here is a pic of the design. This is not the EXACT Design, But very Close. The Rad will sit flus with the bottom of the bar, and a Stock rests on top.
Will work with a Half Rad.
I will be contacting the NUMEROUS amount of people who have been PMing me for these.
I also hae a new 92-00 Design I made up a few weeks ago. I currently don't have pics but I will be posting them up tonight.
#5
Re: EF Traction Bars, Available By the End of the Week
I have to test fit on another EF other then mine because mine is cut out WAY before I even started making these.
My lower Rad support is still there, but it's also bent a little from me prying on it during my "early" years of making these.
Also As stated, the pics are not from the Exect design. That bar Did require you to cut you factory rad supports, but since the the bar has dropped few inches. That bar there did not fit a stock rad. That how high it tucked up in.
My lower Rad support is still there, but it's also bent a little from me prying on it during my "early" years of making these.
Also As stated, the pics are not from the Exect design. That bar Did require you to cut you factory rad supports, but since the the bar has dropped few inches. That bar there did not fit a stock rad. That how high it tucked up in.
#6
Re: EF Traction Bars, Available By the End of the Week
I will also Post pic of them on my car. They are a little dirty and rough from the numerous changes I made to them to come to a final design, but you'll get an Idea of how they sit.
Also I have been running these bars all summer, They have seen track day, with slicks and hard launchs (I don't baby my car EVER) and never have I had a problem. I have sold about 10+ different bars in various designs on HMT and Ebay and I haven't had a complaint yet.
Also I have been running these bars all summer, They have seen track day, with slicks and hard launchs (I don't baby my car EVER) and never have I had a problem. I have sold about 10+ different bars in various designs on HMT and Ebay and I haven't had a complaint yet.
#9
Re: Traction Bars, By the End of the Week *With EG and Current Picks*
Here are the picks of the most Recent Design. This is on my Daily Driver and I Repeat *They look rough because of the numerous mods made to get it right!* Bushings for the supports to the factory location will be made using 1 Peice of DOM Material, not 2 like in the pic.
This is at full lock! PLENTY of Steering Clearance
EG Bars. These were fabbed on my Buddy's 94 Si. His car (although no too visable in the pics) is ULTRA LOW. H&R Race Spring on KYB Struts.
This too is at full lock with 195/50/15 Tire on a 34mm offset wheel, so it's pretty sucked in.
Ignore the Angle Iron. This car has a full width Prelude Rad in. that's his Quick Rad support that we've never changed
These will also be fitted onto Xgenturbo's 4dr if he ever gets his *** over to my shop.
This is at full lock! PLENTY of Steering Clearance
EG Bars. These were fabbed on my Buddy's 94 Si. His car (although no too visable in the pics) is ULTRA LOW. H&R Race Spring on KYB Struts.
This too is at full lock with 195/50/15 Tire on a 34mm offset wheel, so it's pretty sucked in.
Ignore the Angle Iron. This car has a full width Prelude Rad in. that's his Quick Rad support that we've never changed
These will also be fitted onto Xgenturbo's 4dr if he ever gets his *** over to my shop.
#10
Re: Traction Bars, By the End of the Week *With EG and Current Picks*
dam dude, make one for a dam da integra with a half core, i dont really want to try to make somthing that i have to use a measureing tape to make :1 lol, na i just dont know where to get all the joints and ----, and need some directions on the 2 bars