traction bars
since this is fab forum...
i'm interested in building my own traction bars for my DA.. i looked at the ones Full-Race makes.. pretty nice. but WAY out of my budget.. i'm trying to figure out what size tie rod ends i should use.. i was looking at some 7/16" threaded rod ends.. or is that too small? something like this: http://www.cheperformance.com/cartge...rge/QA1CMT.jpg |
Re: traction bars
Way too small for a DA. I would at least get the 5/8 with the 1/2 hole at minimum.
|
Re: traction bars
Ya, 7/16 is too small. Keep in mind factory is 12mm which is only a hair less then 1/2"
My traction bars use High Strength 1/2 Heim Joints. |
Re: traction bars
hmm.. yeah i can get them in 1/2"
the main reason i'm doing this is i want to use a civic half wide radiator and i refuse to cut into the stock front cross member on my DA. so the only other alternative is a custom radiator which costs $400+ or a custom built traction bars that i can put just right to allow use of the civic half wide radiator without it sticking up too high. |
Re: traction bars
If you have the ability to make traction bars, just make a new crossmember out of steel pipe. :6
|
Re: traction bars
I have a 3" downpipe and a half core radiator with a stock CRX crossmember. Took 2 minutes to weld 2 small tabs on the crossmember for the radiator.
|
Re: traction bars
CSaddict, got pics? either way i'd like traction bars ;)
|
Re: traction bars
I really need to find a test dummy for DA Traction bars. These seem to be a hot want item lately
|
Re: traction bars
Originally Posted by bumblezc
I really need to find a test dummy for DA Traction bars. These seem to be a hot want item lately
|
Re: traction bars
Well 90dx. Your in Canada!! Come drive and you can have a set for free. It'll be worth you 30some hours one way!!!
|
Re: traction bars
Originally Posted by Speedz
CSaddict, got pics? either way i'd like traction bars ;)
|
Re: traction bars
I like these hex tube adaptors from the Chassis Shop. I know they are high priced but they are better quality then your average "good for the farm" hardware.
A good friend of mine used a lot of Chassis Shop items on his mid engine CRX project and from what I've seen (for a few bucks extra) I recommend them. [insert gay smiley here] http://180customs.net/v-web/gallery/...0_0077_001.jpg http://180customs.net/v-web/gallery/...0082.sized.jpg |
Re: traction bars
damn!! that looks like alot of work. got any more pics of it?
i'd be up for a testing a set of traction bars.. but theres no way i can drive to cali right now.. i'll be going down to Sand Mt., NV (near reno) for memorial day weekend.. do some sand drags. but thats still quite a ways from southern cali. |
Re: traction bars
Originally Posted by bumblezc
Well 90dx. Your in Canada!! Come drive and you can have a set for free. It'll be worth you 30some hours one way!!!
|
Re: traction bars
MMM there is a Integra CLub in Canada? Post a link and I will get on it. A good set should onlty that my a few hours to rough up and then to put final touches on latter. I would still get a front end clipped off from the wreckers for a jig though like I do with the EF chassis.
|
Re: traction bars
just go to http://www.g2ic.com/forums/ its the generation 2 integra club.. post up that you want to fab up traction bars and need someone to try on their car.. give them your location and i'm sure you'll come across a ton of people..
|
Re: traction bars
Just Signed up. Gotta wait the 7-day Rookie Period!!!
|
Re: traction bars
Where in Canada are you? For a free set of bars I might make a drive up...I'm in NY.
|
Re: traction bars
Around London. About 2.5hrs from toronto. If your that interested there is the Ontario HMT Meet in April/May
|
Re: traction bars
met a guy online the other night.. he's got a DA with a Del Sol radiator.. seems as though the del sol radiator is different than the EG Hatch and coupe halfwide radiators.. so it will fit :D .. i may still do a traction bar, but might wait a while to do it.. got more pressing things to get done first.
|
All times are GMT -5. The time now is 01:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands