traction bar radius rod length question (with finished pics)
how much tube should i get for an EF/ED for the radius rods
hard to find high quality LH thread... heh |
Re: traction bar radius rod length question
3' should be enough.
|
Re: traction bar radius rod length question
yeah i was thinking 6 feet of .750/.120/.510 and get em to cut it in half for me
any tips on LH thread rod ends? i cant find ANYTHING local except some LH Thread 1/2-20 Castle nuts. lol |
Re: traction bar radius rod length question
allstar racing black hex. You can order it in any length. Super cheap.
|
Re: traction bar radius rod length question
These come ordered to length with RH and LH thread already done.
this http://www.allstarperformance.com/product.htm?prod=861 or this http://www.allstarperformance.com/product.htm?prod=483 |
Re: traction bar radius rod length question
|
Re: traction bar radius rod length question
cool thanks for speedway and allstar info.
|
Re: traction bar radius rod length question
speedway has smoken deals on there hiems......
|
Re: traction bar radius rod length question
wow those look so much easier and better than welding nuts to a steel bar...
so anyone who used these on an EF/ED what length did you get? will 20 inches cut it? |
Re: traction bar radius rod length question
Originally Posted by danz
wow those look so much easier and better than welding nuts to a steel bar...
so anyone who used these on an EF/ED what length did you get? will 20 inches cut it? |
Re: traction bar radius rod length question
well someone chime in with the correct length and ill know... heh
|
Re: traction bar radius rod length question
Originally Posted by danz
well someone chime in with the correct length and ill know... heh
That's all I got unless someone that already has them built can measure the actual radus rod. |
Re: traction bar radius rod length question
looks like the rods should be about 16in long. shorter than i thought.
and the bar across looks to be about 38in edit: heh i thought u ment 3 feet per side aaron! haha :8 |
Re: traction bar radius rod length question
a threaded 16 in rod should be perfect for an ef
the 38in bar for the cross member had about an inch extra on each side. worked out well. gonna add brackets to use a stock cross member bolt hole and add a bracket for the torque mount forgot to mention: weirtech ftw :6 http://i33.tinypic.com/1zynog.jpg |
Re: traction bar radius rod length question
Aw ----. I just bought eight feet of aluminum round bar yesterday and then I find this. :1
Sweet deals and handy parts for sure, thanks for the links guys! I'm sure I'll find some other use for the aluminum roundbar... :7 |
Re: traction bar radius rod length question
^ where'd you get the 2" steel bar from? online or locally?
|
Re: traction bar radius rod length question
Damn dude sounds like your well on your way. But unless my brain has gone fuzzy or I have been out from under my car for too long and forget what it looks like, but doesn't the oem crossmember bolt to the unibody horizontally with two bolts each side. That one pictured has large vertical plates.
|
Re: traction bar radius rod length question
Originally Posted by Andrew
^ where'd you get the 2" steel bar from? online or locally?
traction bar is done, had atticus go over the welds with a beefy 180amp miller, MUCH better. added a ---- ton of goodies to the cross member.... i need internet to post some pics. no camera cable at work heheh :7 |
Re: traction bar radius rod length question
I want to see the pics!!! I have the weir flanges too, and I want to see how yours turned out. I also Want to see how you set up your radiator.
|
Re: traction bar radius rod length question
cut off the old rad supports, dropped the rad in with the inserts over the rads nipples, then tacked them in place.
ill get some pics up soon. by the 24th for sure anyways... |
Re: traction bar radius rod length question
are you running a full sized radiator or a half?
|
Re: traction bar radius rod length question
still running the fully, but i have a half size im going to throw in for my next setup (different exhaust manifold and larger turbo)
it shouldn't be a problem to weld on a bracket to support the rad when needed. |
Re: traction bar radius rod length question
Anyone running the weir kit in a da? bolt holes dont line up for ---- in mine.
|
Re: traction bar radius rod length question
as fas as i know the DA uses a completly different style for mounting... it uses horizontal holes (like the stock cross member) not vertical ones (like the tow hooks)
|
Re: traction bar radius rod length question
Yeah if I angle the brackets I can get 2 of the 3 holes to line up.
|
Re: traction bar radius rod length question
Originally Posted by brine04
Anyone running the weir kit in a da? bolt holes dont line up for ---- in mine.
|
Re: traction bar radius rod length question
Oh so these brackets mount to the tow hook location? Interesting. If you were to run a half sized radiator would it have to tilt forward or back at all? Or will it drop down in front/behind the bars and allow you to fab brackets. If thats the case im highly interested. I need to run a half rad but I am in no mood to make it african as ---- and just sit it in behind my radiator support.
|
Re: traction bar radius rod length question
I had to gangster lean the ---- out of my 1/2 rad to get it to fit in my crx. I didnt want it to be lower than my trac bar so I had to tilt it a bunch.
|
Re: traction bar radius rod length question
i need internet to post these bad ass pics.
this traction bar would be sick on a tank. lol :y |
Re: traction bar radius rod length question
Did you put brackets that come off of it that bolt to the sub frame?
|
Re: traction bar radius rod length question
pics yet?
|
Re: traction bar radius rod length question
I'm planning on building something like ETD sells (for $30 haha):
http://www.etdracing.com/products/traction/newrad1.jpg http://www.etdracing.com/products/traction/rad4.jpg GL I'm looking forward to finsihed pics because I'm about to start on mine!!! |
Re: traction bar radius rod length question
can someone post pics of the pattern for the da so i can remedy this issue asap. i don't like to ship stuff people can't use.
|
Re: traction bar radius rod length question
Originally Posted by weiRtech
can someone post pics of the pattern for the da so i can remedy this issue asap. i don't like to ship stuff people can't use.
Must vendor I've dealt with will either ignore any problems with fitment and chalk it up as installer error or they eventually solve the problem about 6 mo. or longer. I have never bought anything WEIR but after reading about his work and customer service I will be ordering some things from him soon. |
Re: traction bar radius rod length question
+1
|
Re: traction bar radius rod length question
i get internet back tomorrow. should have pics up before nightfall. lol
|
Re: traction bar radius rod length question
can someone update me with some details on the da tow hook pattern? i'm willing to ship some replacement towhook flanges for some pics/details/dimensions.
|
Re: traction bar radius rod length question
My car is 6 hours away right now so I can't get any pics of how your flanges compare to the da holes. If you get it figured out I would be interested in getting the revised flange kit from you though.
|
Re: traction bar radius rod length question
Let me know where your car is bnorth and i could possibly run and take some pictures for yah
|
Re: traction bar radius rod length question
I would go out on a limb here and say bnorth's car is at the farm.
|
All times are GMT -5. The time now is 01:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands